Paper · 2023 · Open access

EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING

Enzo Martinelli, Matteo Breveglieri, Christoph Czaderski, Niloufar Moshiri

DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) · Published 21 June 2023 · DOI 10.5281/zenodo.8066163

Open PDFView at the publisherCite this paper

In brief

“EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING” is a 2023 paper by Enzo Martinelli and 3 co-authors, published in DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)). OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)).

Citations
1
Most cited in
2025 (1)
Field-weighted impact
0.52
References
8
Authors
4

Abstract

Fiber-Reinforced Polymer (FRP) strips are often utilized with the aim to enhance the bending capacity of Reinforced Concrete (RC) slabs, in view for the latter to either resist higher loads or face aging and damage issues. However, the weak link of Externally Bonded Reinforcement (EBR) is the adhesion between the FRP strip and the concrete substrate. Several studies, both experimental and theoretical were conducted to better understand the mechanical foundations and, thus, come up with effective technological solutions capable to avoid the so-called debonding failure between FRP and concrete. In this context, Externally Bonded Reinforcement on Grooves (EBROG) emerged as a convenient technology to enhance the bonding capacity of FRP strips glued on concrete. This paper summarizes the results obtained from three experimental tests carried out on 6-m-long RC slabs strengthened in bending by FRP strips glued according to either EBR or EBROG technique. Specifically, two slabs were strengthened by an EBROG FRP strip, which in one case was also prestressed before gluing. The experimental results demonstrate the higher capacity of EBROG with respect to the conventional EBR technique and some numerical analyses show that the observed mechanical behaviour can be easily interpreted by means of reasonably simple theoretical models.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Martinelli, E., Breveglieri, M., Czaderski, C., & Moshiri, N. (2023). EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING. DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)). https://doi.org/10.5281/zenodo.8066163

MLA 9

Martinelli, Enzo, et al. “EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING.” DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)), 2023. https://doi.org/10.5281/zenodo.8066163.

Chicago

Martinelli, Enzo, Matteo Breveglieri, Christoph Czaderski, and Niloufar Moshiri. 2023. “EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING.” DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)). https://doi.org/10.5281/zenodo.8066163.

Harvard

Martinelli, E. et al. (2023) ‘EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING’, DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)). doi:10.5281/zenodo.8066163.

IEEE

E. Martinelli, M. Breveglieri, C. Czaderski, and N. Moshiri, “EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING,” DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)), 2023, doi: 10.5281/zenodo.8066163.

BibTeX

@article{martinelli2023ebrog,
  title     = {{EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING}},
  author    = {Martinelli, Enzo and Breveglieri, Matteo and Czaderski, Christoph and Moshiri, Niloufar},
  journal   = {DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa))},
  year      = {2023},
  doi       = {10.5281/zenodo.8066163},
  url       = {https://doi.org/10.5281/zenodo.8066163}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete

  • externally bonded reinforcement
  • FRP strips
  • FRP strengthening
  • reinforced concrete slabs
  • flexural capacity
  • debonding failure
  • prestressed FRP

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Martinelli, E., Breveglieri, M., Czaderski, C., & Moshiri, N. (2023). EBR VS EBROG FOR FRP STRENGTHENING OF RC SLABS: EXPERIMENTAL AND NUMERICAL MODELLING. DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)). https://doi.org/10.5281/zenodo.8066163

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)): sign in and open the PDF from this page.

Who wrote this paper?

Enzo Martinelli, Matteo Breveglieri, Christoph Czaderski, Niloufar Moshiri.

What is the DOI of this paper?

10.5281/zenodo.8066163, permanently at https://doi.org/10.5281/zenodo.8066163. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.