Journal article · 2025 · Open access
Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability
Advanced Science, 13(2), e14441 · Published 20 November 2025 · DOI 10.1002/advs.202514441
In brief
“Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability” is a 2025 journal article by Qinlin Tan and 5 co-authors, published in Advanced Science. OpenAlex counts 7 citations as of 22 November 2026, which puts it in the top 2% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Advanced Science.
- Citations
- 7
- Most cited in
- 2026 (7)
- Field-weighted impact
- 1.23
- References
- 60
- Authors
- 6
Abstract
Soft actuators are gaining attention for their exceptional deformability and adaptability to meet the diverse demands of practical soft robotics applications. However, soft actuators with pneumatic actuation often struggle to simultaneously achieve large-range motions and structural stability. Addressing this challenge, a dual-chamber straight-curved crease origami prismatic (SCOP) actuator is proposed that introduces anisotropic stiffness through origami-inspired straight-curved creases and a foldable partition, enabling multidimensional motions including elongation and contraction, with an axial displacement reaching 106.7% of the actuator's original length (elongation 51.1% and contraction 55.6%), over 160° bidirectional bending, and a 209% increase in structural stability compared to curve crease bellows. The actuator is fabricated through one-step molding using a single material, and its principles, modeling, and design are systematically analyzed. The versatility and feasibility of the SCOP actuator are validated through its integrations into a wearable assistive device, a soft gripper, and a single-actuator crawling robot, which leverage various combinations of the SCOP's actuation modes to meet diverse motion requirements. This design provides a high-performance and practical solution for soft robotic systems requiring large-range, multidirectional motions with enhanced strength and reliability.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Tan, Q., Chen, Y., Zhou, M., Tong, S. F., Liu, S., & Tong, R. K. (2025). Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability. Advanced Science, 13(2), e14441. https://doi.org/10.1002/advs.202514441
MLA 9
Tan, Qinlin, et al. “Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability.” Advanced Science, vol. 13, no. 2, 2025, p. e14441. https://doi.org/10.1002/advs.202514441.
Chicago
Tan, Qinlin, Yanlin Chen, Meng Zhou, Shuk Fan Tong, Sicong Liu, and Raymond Kai‐Yu Tong. 2025. “Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability.” Advanced Science 13 (2): e14441. https://doi.org/10.1002/advs.202514441.
Harvard
Tan, Q. et al. (2025) ‘Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability’, Advanced Science, 13(2), p. e14441. doi:10.1002/advs.202514441.
IEEE
Q. Tan, Y. Chen, M. Zhou, S. F. Tong, S. Liu, and R. K. Tong, “Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability,” Advanced Science, vol. 13, no. 2, p. e14441, 2025, doi: 10.1002/advs.202514441.
BibTeX
@article{tan2025dual,
title = {{Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability}},
author = {Tan, Qinlin and Chen, Yanlin and Zhou, Meng and Tong, Shuk Fan and Liu, Sicong and Tong, Raymond Kai‐Yu},
journal = {Advanced Science},
year = {2025},
volume = {13},
number = {2},
pages = {e14441},
doi = {10.1002/advs.202514441},
url = {https://doi.org/10.1002/advs.202514441}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- soft actuators
- pneumatic actuation
- origami-inspired design
- prismatic actuators
- anisotropic stiffness
- structural stability
- soft robotics
- wearable assistive device
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Tan, Q., Chen, Y., Zhou, M., Tong, S. F., Liu, S., & Tong, R. K. (2025). Dual‐Chamber One‐Step Molding Actuator with Straight‐Curved Crease Prismatic Design for Large‐Range Motions and Structural Stability. Advanced Science, 13(2), e14441. https://doi.org/10.1002/advs.202514441
How many times has this paper been cited?
7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced Science: sign in and open the full text from this page.
Who wrote this paper?
Qinlin Tan, Yanlin Chen, Meng Zhou, Shuk Fan Tong, Sicong Liu, Raymond Kai‐Yu Tong.
What is the DOI of this paper?
10.1002/advs.202514441, permanently at https://doi.org/10.1002/advs.202514441. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.