Journal article · 2023 · Open access
Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities
Journal of Materials Research and Technology, 26, 6027–6040 · Published 30 August 2023 · DOI 10.1016/j.jmrt.2023.08.278
In brief
“Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities” is a 2023 journal article by Seongmin Kang and 7 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 10 citations as of 16 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Materials Research and Technology.
- Citations
- 10
- Most cited in
- 2026 (5)
- Field-weighted impact
- 1.00
- References
- 34
- Authors
- 8
Abstract
Diamond-Like Carbon (DLC) coating is an effective surface treatment method for improving the tribological properties of machine elements and tool materials. Among them, the tetrahedral amorphous carbon (ta-C) coating has recently received much attention due to its high hardness and good heat resistance. When characterizing friction and wear patterns related to the lifetime and cost, the thickness of the ta-C coating and the type of substrates play an important role. In this paper, ta-C coatings of two thicknesses are deposited on 304 stainless steel (SS) and cemented carbide (WC-Co), which have significant differences in mechanical properties, through filtered cathodic vacuum arc (FCVA) equipment. After ta-C coating on substrates, the tribological properties of each sample are investigated. As a result, compared to bare materials, ta-C-coated materials have a reduced coefficient of friction and improved wear resistance. However, as the base material is softer, tearing occurs in a thin coating so that a thicker ta-C coating might improves the tribological properties. Since thicker ta-C coatings do not always improve tribological properties, the efficiency can be increased by customizing the ta-C coating thickness according to the substrate layer material.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kang, S., Ha, S., Kim, K.-H., Lee, Y., Jang, Y.-J., Kim, J., Lee, K., & Kim, H. J. (2023). Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities. Journal of Materials Research and Technology, 26, 6027–6040. https://doi.org/10.1016/j.jmrt.2023.08.278
MLA 9
Kang, Seongmin, et al. “Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities.” Journal of Materials Research and Technology, vol. 26, 2023, pp. 6027–6040. https://doi.org/10.1016/j.jmrt.2023.08.278.
Chicago
Kang, Seongmin, Sangyul Ha, Ki-Hwan Kim, Yurim Lee, Young-Jun Jang, Jong‐Kuk Kim, Kyungjun Lee, and Ho Jun Kim. 2023. “Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities.” Journal of Materials Research and Technology 26: 6027–6040. https://doi.org/10.1016/j.jmrt.2023.08.278.
Harvard
Kang, S. et al. (2023) ‘Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities’, Journal of Materials Research and Technology, 26, pp. 6027–6040. doi:10.1016/j.jmrt.2023.08.278.
IEEE
S. Kang et al., “Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities,” Journal of Materials Research and Technology, vol. 26, pp. 6027–6040, 2023, doi: 10.1016/j.jmrt.2023.08.278.
BibTeX
@article{kang2023wear,
title = {{Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities}},
author = {Kang, Seongmin and Ha, Sangyul and Kim, Ki-Hwan and Lee, Yurim and Jang, Young-Jun and Kim, Jong‐Kuk and Lee, Kyungjun and Kim, Ho Jun},
journal = {Journal of Materials Research and Technology},
year = {2023},
volume = {26},
pages = {6027--6040},
doi = {10.1016/j.jmrt.2023.08.278},
url = {https://doi.org/10.1016/j.jmrt.2023.08.278}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 4 | |
| 2025 | 1 | |
| 2026 | 5 |
Its field-weighted citation impact is 1.00: it has been cited 1.00 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- tetrahedral amorphous carbon
- diamond-like carbon films
- dry wear
- tribological properties
- friction coefficient
- coating thickness
- 304 stainless steel
- cemented carbides
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kang, S., Ha, S., Kim, K.-H., Lee, Y., Jang, Y.-J., Kim, J., Lee, K., & Kim, H. J. (2023). Dry wear behavior of identical tetrahedral amorphous carbon nanofilms on sintered composites and metal substrate with varying load bearing capacities. Journal of Materials Research and Technology, 26, 6027–6040. https://doi.org/10.1016/j.jmrt.2023.08.278
How many times has this paper been cited?
10 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Journal of Materials Research and Technology.
Who wrote this paper?
Seongmin Kang, Sangyul Ha, Ki-Hwan Kim, Yurim Lee, Young-Jun Jang, Jong‐Kuk Kim, Kyungjun Lee, Ho Jun Kim.
What is the DOI of this paper?
10.1016/j.jmrt.2023.08.278. The permanent link is https://doi.org/10.1016/j.jmrt.2023.08.278.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.