Conference paper · 2018 · Open access
Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing
International Conference on Ion Implantation Technology, 58–61 · Published 1 September 2018 · DOI 10.1109/iit.2018.8807904
In brief
“Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing” is a 2018 conference paper by Matthias Kocher and 4 co-authors, published in International Conference on Ion Implantation Technology. OpenAlex counts 1 citations as of 16 November 2026. It is open access: the full text is free to read at Fraunhofer-Publica (Fraunhofer-Gesellschaft).
- Citations
- 1
- Most cited in
- 2020 (1)
- Field-weighted impact
- 0.40
- References
- 4
- Authors
- 5
Abstract
The influence of the high temperature annealing on differently implanted Al profiles was investigated by SIMS measurements. Depending on the implanted dose and also depending on the local concentration a significant diffusion of the implanted Al was observed. Based on this results at least two necessary conditions of Al diffusion during high temperature annealing could be determined.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kocher, M., Rommel, M., Sledziewski, T., Häublein, V., & Bauer, A. J. (2018). Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing. International Conference on Ion Implantation Technology, 58–61. https://doi.org/10.1109/iit.2018.8807904
MLA 9
Kocher, Matthias, et al. “Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing.” International Conference on Ion Implantation Technology, 2018, pp. 58–61. https://doi.org/10.1109/iit.2018.8807904.
Chicago
Kocher, Matthias, Mathias Rommel, Tomasz Sledziewski, Volker Häublein, and Anton J. Bauer. 2018. “Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing.” International Conference on Ion Implantation Technology: 58–61. https://doi.org/10.1109/iit.2018.8807904.
Harvard
Kocher, M. et al. (2018) ‘Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing’, International Conference on Ion Implantation Technology, pp. 58–61. doi:10.1109/iit.2018.8807904.
IEEE
M. Kocher, M. Rommel, T. Sledziewski, V. Häublein, and A. J. Bauer, “Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing,” International Conference on Ion Implantation Technology, pp. 58–61, 2018, doi: 10.1109/iit.2018.8807904.
BibTeX
@inproceedings{kocher2018dose,
title = {{Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing}},
author = {Kocher, Matthias and Rommel, Mathias and Sledziewski, Tomasz and Häublein, Volker and Bauer, Anton J.},
booktitle = {International Conference on Ion Implantation Technology},
year = {2018},
pages = {58--61},
doi = {10.1109/iit.2018.8807904},
url = {https://doi.org/10.1109/iit.2018.8807904}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- aluminum ion implantation
- 4H-SiC
- high-temperature annealing
- aluminum diffusion
- dopant distribution
- silicon carbide
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kocher, M., Rommel, M., Sledziewski, T., Häublein, V., & Bauer, A. J. (2018). Dose Dependent Profile Deviation of Implanted Aluminum in 4H-SiC During High Temperature Annealing. International Conference on Ion Implantation Technology, 58–61. https://doi.org/10.1109/iit.2018.8807904
How many times has this paper been cited?
1 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Fraunhofer-Publica (Fraunhofer-Gesellschaft).
Who wrote this paper?
Matthias Kocher, Mathias Rommel, Tomasz Sledziewski, Volker Häublein, Anton J. Bauer.
What is the DOI of this paper?
10.1109/iit.2018.8807904. The permanent link is https://doi.org/10.1109/iit.2018.8807904.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.