Journal article · 2009 · Open access

Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos

Ricardo Perera Velamazán, Javier Vique García, Ángel Arteaga Iriarte, Ana de Diego

Hormigón y Acero, 65–83 · Published 1 January 2009

Open full textCite this paper

In brief

“Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos” is a 2009 journal article by Ricardo Perera Velamazán and 3 co-authors, published in Hormigón y Acero. OpenAlex counts 5 citations as of 22 November 2026, which puts it in the top 7% of works published in 2009 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Hormigón y Acero.

Citations
5
Most cited in
2012 (2)
Field-weighted impact
4.38
Authors
4

Abstract

The use of composite materials to strengthen reinforced concrete structures has become increasingly popular in recent years. Three types of strengthening - bending, confinement and shear - have been addressed in the design guides published to date, although the third has been insufficiently developed. Further theoretical and experimental study is needed to obtain a fuller understanding of the mechanisms involved. In the theoretical study described in this paper, a strut and tie-based model was developed to determine the shear strength of reinforced concrete beams strengthened with fibre-reinforced polymer (FRP) bonded plates The contribution made by the concrete is reinforced by the effect of the tie, i.e., account is taken of the contributions of both the internal and external reinforcement, corresponding to the optimal strut-and-tie resisting mechanism. The optimal strength mechanism is found by solving an optimization problem with gene tic algorithms that define the optimal strut and tie geometry. The model proposed was validated by estimating the shear strength of experimentally tested FRP-strengthened beams. Model predictions were also compared to the predictions directly obtained by applying the methods set out in a number of concrete standards and design guides on FRP strengthening.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Velamazán, R. P., García, J. V., Iriarte, Á. A., & de Diego, A. (2009). Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos. Hormigón y Acero, 65–83. https://www.hormigonyacero.com/index.php/ache/article/view/44

MLA 9

Velamazán, Ricardo Perera, et al. “Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos.” Hormigón y Acero, no. 254, 2009, pp. 65–83. https://www.hormigonyacero.com/index.php/ache/article/view/44.

Chicago

Velamazán, Ricardo Perera, Javier Vique García, Ángel Arteaga Iriarte, and Ana de Diego. 2009. “Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos.” Hormigón y Acero (254): 65–83. https://www.hormigonyacero.com/index.php/ache/article/view/44.

Harvard

Velamazán, R. P. et al. (2009) ‘Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos’, Hormigón y Acero, pp. 65–83. Available at: https://www.hormigonyacero.com/index.php/ache/article/view/44.

IEEE

R. P. Velamazán, J. V. García, Á. A. Iriarte, and A. de Diego, “Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos,” Hormigón y Acero, no. 254, pp. 65–83, 2009.

BibTeX

@article{velamazan2009dise,
  title     = {{Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos}},
  author    = {Velamazán, Ricardo Perera and García, Javier Vique and Iriarte, Ángel Arteaga and de Diego, Ana},
  journal   = {Hormigón y Acero},
  year      = {2009},
  number    = {254},
  pages     = {65--83},
  url       = {https://www.hormigonyacero.com/index.php/ache/article/view/44}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete

  • shear strength
  • reinforced concrete beams
  • FRP strengthening
  • fiber-reinforced polymer
  • strut-and-tie model
  • genetic algorithm
  • shear strengthening
  • design code comparison

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Velamazán, R. P., García, J. V., Iriarte, Á. A., & de Diego, A. (2009). Diseño a cortante de vigas de hormigón armado con armadura de acero y armadura externa de FRP mediante el mecanismo de vielas y tirantes y algorítmos genéticos. Hormigón y Acero, 65–83. https://www.hormigonyacero.com/index.php/ache/article/view/44

How many times has this paper been cited?

5 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Hormigón y Acero: sign in and open the full text from this page.

Who wrote this paper?

Ricardo Perera Velamazán, Javier Vique García, Ángel Arteaga Iriarte, Ana de Diego.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.