Dissertation · 2019 · Open access

Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications

Mihai Duduta

Digital Access to Scholarship at Harvard (DASH) (Harvard University) · Published 16 January 2019

Open full textCite this paper

In brief

“Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications” is a 2019 dissertation by Mihai Duduta, published in Digital Access to Scholarship at Harvard (DASH) (Harvard University). OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Digital Access to Scholarship at Harvard (DASH) (Harvard University).

Citations
1
Most cited in
2026 (1)
References
118
Authors
1

Abstract

Dielectric elastomer actuators (DEAs) are electro-mechanical transducers which can convert an electrical input into mechanical work. They have clear advantages (i.e., soft elastomers, direct electrical to mechanical conversion) which make them particularly promising for soft robotics applications. Unfortunately, most DEAs have severe limitations: low output forces, the need for a rigid frame, high voltages needed for actuation, slow response speed, low energy density, and challenging integration with other components. This thesis describes a material-focused approach to address these limitations, using unique robotic demonstrations as proof of the material and device capabilities. \nTo ensure the final DEA is completely soft, I focused on strain stiffening elastomer materials, made from UV curable liquid precursors. These are combined with ultra-thin carbon nanotube (CNT) mats in a multilayering process which yields robust actuators, capable of bending, linear expansion, as well as contraction. The process gives control over each layer's thickness, meaning low voltage demonstrations are possible, such as bending at 300-600 V. Additionally, each electrode can be made from a specific ink, processed independently from the rest of the multilayer. Using thermally treated electrodes at low areal densities of CNTs, I built multilayers that can be charged to high electric fields (>200 V/micron), to do mechanical work at high energy density (10-20 J/kg). \nUsing a multilayer bending beam, I demonstrated a crawling robot, capable of high speed locomotion (>1 body length / second). The crawling speed was set by the viscoelasticity of the elastomer, showing the strong dependence of robot performance on material properties. Additionally, the same bending beams were built into a bimorph used to power a swimming robot. By incorporating a pressure sensor and reconfiguring the robot to dive, I demonstrated the first ever autonomous DEA-powered robot. Lastly, using high energy density DEAs and a composite structure, I showed the first ever DEA-powered jumping robot. Overall, the multilayer platform allowed me to use material improvements (elastomers with lower viscoelastic losses, electrodes with higher conductivity, etc.) to build robots with unprecedented capabilities (high energy density, large bandwidth, impulsive behavior, etc.).

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Duduta, M. (2019). Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications. Digital Access to Scholarship at Harvard (DASH) (Harvard University). http://nrs.harvard.edu/urn-3:HUL.InstRepos:41121308

MLA 9

Duduta, Mihai. “Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications.” Digital Access to Scholarship at Harvard (DASH) (Harvard University), 2019. http://nrs.harvard.edu/urn-3:HUL.InstRepos:41121308.

Chicago

Duduta, Mihai. 2019. “Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications.” Digital Access to Scholarship at Harvard (DASH) (Harvard University). http://nrs.harvard.edu/urn-3:HUL.InstRepos:41121308.

Harvard

Duduta, M. (2019) ‘Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications’, Digital Access to Scholarship at Harvard (DASH) (Harvard University). Available at: http://nrs.harvard.edu/urn-3:HUL.InstRepos:41121308.

IEEE

M. Duduta, “Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications,” Digital Access to Scholarship at Harvard (DASH) (Harvard University), 2019.

BibTeX

@phdthesis{duduta2019dielectric,
  title     = {{Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications}},
  author    = {Duduta, Mihai},
  year      = {2019},
  url       = {http://nrs.harvard.edu/urn-3:HUL.InstRepos:41121308}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators

  • dielectric elastomer actuators
  • artificial muscles
  • soft robotics
  • carbon nanotube electrodes
  • multilayer actuators
  • crawler robot
  • swimming robot
  • jumping robot

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Duduta, M. (2019). Dielectric Elastomer Actuators as Artificial Muscles for Soft Robotic Applications. Digital Access to Scholarship at Harvard (DASH) (Harvard University). http://nrs.harvard.edu/urn-3:HUL.InstRepos:41121308

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Digital Access to Scholarship at Harvard (DASH) (Harvard University): sign in and open the full text from this page.

Who wrote this paper?

Mihai Duduta.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.