Journal article · 2012 · Open access
Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs
Advanced materials research, 591-593, 337–341 · Published 29 November 2012 · DOI 10.4028/www.scientific.net/amr.591-593.337
In brief
“Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs” is a 2012 journal article by Shun Hui Yao and 2 co-authors, published in Advanced materials research. OpenAlex counts 4 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 4
- Most cited in
- 2017 (2)
- References
- 19
- Authors
- 3
Abstract
A group of Zr-Ti-N coatings was prepared and studied to access their potential as a protective layer for micro drills to obtain cutting tool wear improvement. The coatings were grown using an industrial-scale four-target closed-field unbalanced magnetron sputtering ion plating system, employing one Ti and three Zr targets working in residual N2 atmosphere. To achieve Zr-Ti-N coatings with varying Ti doping content, the current applied to the Ti target was subjected to change from 0A to 3.6A while those to the Zr targets were kept constant. The coatings were characterized using GDOES, XRD, SEM, Vickers microhardness tester, scratch tester and Rockwell C indentation tester. Evaluation of wear improvement by Zr-Ti-N coatings for microdrills was conducted by machining of FR4 print circuit boards. It was found that the coatings with 16.5 at.% Ti doping content showed the highest microhardness and wear improvement for microdrills. Wear of microdrills with this coating could be reduced by a factor of two as compared with traditional TiN coated ones.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Yao, S. H., Su, Y. L., & Kao, W. (2012). Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs. Advanced materials research, 591-593, 337–341. https://doi.org/10.4028/www.scientific.net/amr.591-593.337
MLA 9
Yao, Shun Hui, et al. “Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs.” Advanced materials research, vol. 591-593, 2012, pp. 337–341. https://doi.org/10.4028/www.scientific.net/amr.591-593.337.
Chicago
Yao, Shun Hui, Yan Liang Su, and W.H. Kao. 2012. “Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs.” Advanced materials research 591-593: 337–341. https://doi.org/10.4028/www.scientific.net/amr.591-593.337.
Harvard
Yao, S. H., Su, Y. L. and Kao, W. (2012) ‘Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs’, Advanced materials research, 591-593, pp. 337–341. doi:10.4028/www.scientific.net/amr.591-593.337.
IEEE
S. H. Yao, Y. L. Su, and W. Kao, “Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs,” Advanced materials research, vol. 591-593, pp. 337–341, 2012, doi: 10.4028/www.scientific.net/amr.591-593.337.
BibTeX
@article{yao2012development,
title = {{Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs}},
author = {Yao, Shun Hui and Su, Yan Liang and Kao, W.H.},
journal = {Advanced materials research},
year = {2012},
volume = {591-593},
pages = {337--341},
doi = {10.4028/www.scientific.net/amr.591-593.337},
url = {https://doi.org/10.4028/www.scientific.net/amr.591-593.337}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 2 | |
| 2020 | 1 | |
| 2023 | 1 |
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- microdrill
- tool wear
- printed circuit board drilling
- FR4
- unbalanced magnetron sputtering
- ion plating
- titanium doping
- microhardness
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Yao, S. H., Su, Y. L., & Kao, W. (2012). Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs. Advanced materials research, 591-593, 337–341. https://doi.org/10.4028/www.scientific.net/amr.591-593.337
How many times has this paper been cited?
4 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
Shun Hui Yao, Yan Liang Su, W.H. Kao.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.591-593.337, permanently at https://doi.org/10.4028/www.scientific.net/amr.591-593.337. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.