Paper · 2026 · Open access

Development of α two-material robotic gripper with variable compliance using additive manufacturing

Nefeli Andreopoulou, George-Christopher Vosniakos

Zenodo (CERN European Organization for Nuclear Research) · Published 31 March 2026 · DOI 10.5281/zenodo.21818783

Open full textCite this paper

In brief

“Development of α two-material robotic gripper with variable compliance using additive manufacturing” is a 2026 paper by Nefeli Andreopoulou and George-Christopher Vosniakos, published in Zenodo (CERN European Organization for Nuclear Research). OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Zenodo (CERN European Organization for Nuclear Research).

Citations
0
Authors
2

Abstract

A two-material soft robotic gripper based on the Fin Ray Effect is presented. The gripper was developed to combine the shape adaptability of compliant fingers with the structural reliability required for repeated pick-and-place tasks. The design uses thermoplastic polyurethane (TPU) for the deformable finger frame and joints and polylactic acid (PLA) for the crossbeams that guide deformation. A sliding male-female joint was introduced to allow assembly and disassembly without screws or adhesive while maintaining controlled rotational freedom. The gripper is actuated by a lead-screw mechanism that transforms rotation into linear motion and closes (or opens) the two fingers around the object. CAD-based kinematic checks, finite-element simulations for finger deformation checks and prototype tests were used to evaluate the design. The models confirmed the ability of the gripper to handle cylindrical objects up to 60 mm in diameter, weighing up to 400 g, with a maximum targeted gripping force of 8 N. The prototype was fabricated by material-extrusion Additive Manufacturing and was tested with objects of different hardness, mass, shape and sensitivity. The results show that a low-cost, modular two-material Fin Ray gripper can provide practical adaptive grasping while being easy to customize and manufacture.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Andreopoulou, N., & Vosniakos, G.-C. (2026). Development of α two-material robotic gripper with variable compliance using additive manufacturing. Zenodo (CERN European Organization for Nuclear Research). https://doi.org/10.5281/zenodo.21818783

MLA 9

Andreopoulou, Nefeli, and George-Christopher Vosniakos. “Development of α two-material robotic gripper with variable compliance using additive manufacturing.” Zenodo (CERN European Organization for Nuclear Research), 2026. https://doi.org/10.5281/zenodo.21818783.

Chicago

Andreopoulou, Nefeli and George-Christopher Vosniakos. 2026. “Development of α two-material robotic gripper with variable compliance using additive manufacturing.” Zenodo (CERN European Organization for Nuclear Research). https://doi.org/10.5281/zenodo.21818783.

Harvard

Andreopoulou, N. and Vosniakos, G.-C. (2026) ‘Development of α two-material robotic gripper with variable compliance using additive manufacturing’, Zenodo (CERN European Organization for Nuclear Research). doi:10.5281/zenodo.21818783.

IEEE

N. Andreopoulou and G.-C. Vosniakos, “Development of α two-material robotic gripper with variable compliance using additive manufacturing,” Zenodo (CERN European Organization for Nuclear Research), 2026, doi: 10.5281/zenodo.21818783.

BibTeX

@article{andreopoulou2026development,
  title     = {{Development of α two-material robotic gripper with variable compliance using additive manufacturing}},
  author    = {Andreopoulou, Nefeli and Vosniakos, George-Christopher},
  journal   = {Zenodo (CERN European Organization for Nuclear Research)},
  year      = {2026},
  doi       = {10.5281/zenodo.21818783},
  url       = {https://doi.org/10.5281/zenodo.21818783}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft gripper
  • variable compliance
  • thermoplastic polyurethane
  • polylactic acid
  • pick-and-place
  • adaptive grasping
  • extrusion-based additive manufacturing

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Andreopoulou, N., & Vosniakos, G.-C. (2026). Development of α two-material robotic gripper with variable compliance using additive manufacturing. Zenodo (CERN European Organization for Nuclear Research). https://doi.org/10.5281/zenodo.21818783

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Zenodo (CERN European Organization for Nuclear Research): sign in and open the full text from this page.

Who wrote this paper?

Nefeli Andreopoulou, George-Christopher Vosniakos.

What is the DOI of this paper?

10.5281/zenodo.21818783, permanently at https://doi.org/10.5281/zenodo.21818783. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.