Dissertation · 2012 · Open access

Development of Computational Multiaxial Fatigue Modelling For Notched Components

Ayhan Ince

UWSpace (University of Waterloo) · Published 3 May 2012

Open full textCite this paper

In brief

“Development of Computational Multiaxial Fatigue Modelling For Notched Components” is a 2012 dissertation by Ayhan Ince, published in UWSpace (University of Waterloo). OpenAlex counts 22 citations as of 22 November 2026. It is open access: the full text is free to read at UWSpace (University of Waterloo).

Citations
22
Most cited in
2019 (4)
References
73
Authors
1

Abstract

Fatigue failures of driveline and suspensions components for ground vehicles under multiaxial loading conditions are common, since most those components are subjected to complex multiaxial loadings in service. In addition to the multiaxial loadings, many of those components contain notches and geometrical irregularities where the fatigue failure often occurs due to stress concentrations. Therefore, the origins of the multiaxiality can be related to various combinations of external loadings and notch geometries. \nA computational fatigue analysis methodology has been proposed here for performing multiaxial fatigue life prediction for notched components using analytical and numerical methods. The proposed multiaxial fatigue analysis methodology consists of an elastic-plastic stress/strain model and a multiaxial fatigue damage parameter. The multiaxial stress-strain notch analysis method originally proposed by Buczynski and Glinka is adapted to develop the elastic-plastic stress/strain model to compute local stress-strain responses using linear elastic FE results of notched components. An original multiaxial fatigue damage parameter based on the maximum fatigue damage plane is proposed to predict the fatigue life for notched components under multiaxial loadings. \nResults of the proposed multiaxial fatigue analysis methodology are compared to sets of experimental data published in the literature to verify the prediction capability of the elastic-plastic stress/strain model and the multiaxial fatigue damage parameter. Based on the comparison between calculated results and experimental data, it is found that the multiaxial elastic-plastic stress/strain model correlates well with experimental strain data for SAE 1070 steel notched shafts subjected to several non-proportional load paths. The proposed multiaxial fatigue damage parameter, when applied to the uniaxial loading to account for the mean stress effect on fatigue life, is found to correlate very well with four sets of experimental uniaxial mean stress fatigue data. In the case of multiaxial loadings, the proposed multiaxial fatigue damage parameter provides very good correlation with experimental fatigue data of thin-walled tube specimens of 1045 steel and Inconel 718. In addition, the proposed fatigue damage parameter is found to correlate reasonably well with experimental fatigue data of SAE 1045 steel notched shafts subjected to proportional and non-proportional loadings. \nThe proposed multiaxial fatigue analysis methodology enables rapid durability evaluation for notched components design. The effect of changes in material, geometry and loads on the fatigue life can then be assessed in a short time frame. The proposed multiaxial fatigue analysis methodology provides more efficient and appropriate analysis methods preferable to very expensive experimental durability tests and more complex and time consuming life prediction methods using non-linear FE stress-strain analysis.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ince, A. (2012). Development of Computational Multiaxial Fatigue Modelling For Notched Components. UWSpace (University of Waterloo). http://hdl.handle.net/10012/6705

MLA 9

Ince, Ayhan. “Development of Computational Multiaxial Fatigue Modelling For Notched Components.” UWSpace (University of Waterloo), 2012. http://hdl.handle.net/10012/6705.

Chicago

Ince, Ayhan. 2012. “Development of Computational Multiaxial Fatigue Modelling For Notched Components.” UWSpace (University of Waterloo). http://hdl.handle.net/10012/6705.

Harvard

Ince, A. (2012) ‘Development of Computational Multiaxial Fatigue Modelling For Notched Components’, UWSpace (University of Waterloo). Available at: http://hdl.handle.net/10012/6705.

IEEE

A. Ince, “Development of Computational Multiaxial Fatigue Modelling For Notched Components,” UWSpace (University of Waterloo), 2012.

BibTeX

@phdthesis{ince2012development,
  title     = {{Development of Computational Multiaxial Fatigue Modelling For Notched Components}},
  author    = {Ince, Ayhan},
  year      = {2012},
  url       = {http://hdl.handle.net/10012/6705}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201311
201533
201733
201822
201944
202011
202122
202211
202433
202622

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics

  • multiaxial fatigue
  • notched components
  • fatigue life prediction
  • stress concentration
  • mean stress effects
  • non-proportional loading
  • suspension components
  • AISI 1045 steel

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Ince, A. (2012). Development of Computational Multiaxial Fatigue Modelling For Notched Components. UWSpace (University of Waterloo). http://hdl.handle.net/10012/6705

How many times has this paper been cited?

22 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at UWSpace (University of Waterloo): sign in and open the full text from this page.

Who wrote this paper?

Ayhan Ince.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.