Paper · 2006 · Open access
Development of an anthropomorphic robot finger : mechanical and kinematic aspects
OAR@UM (University of Malta) · Published 1 January 2006
In brief
“Development of an anthropomorphic robot finger : mechanical and kinematic aspects” is a 2006 paper by Nathaniel Mifsud and 3 co-authors, published in OAR@UM (University of Malta). OpenAlex counts 3 citations as of 22 November 2026. It is open access: the full text is free to read at OAR@UM (University of Malta).
- Citations
- 3
- Most cited in
- 2012 (1)
- Field-weighted impact
- 0.41
- References
- 11
- Authors
- 4
Abstract
In this work, we report on the mechanical design and development, the kinematic analysis, and the simulation of a new dexterous robot finger. The robot finger design is based on that of the human counterpart in size, mechanical structure, and range of motion, and exhibits four distinct joint motions (one abduction/adduction or yaw motion, and three flexion/extension or pitch motions), as does the human finger. Three miniature DC motors with built-in encoders drive the yaw motion of the finger and the two innermost pitch joints. The finger therefore has three independent degrees of freedom. The outermost pitch joint of the finger is mechanically coupled to the middle joint, and the design allows for the variation of the ratio of angular speed between the two coupled joint motions. The motors are installed on the finger itself and on the adjoining section of palm, and the required torques at the joints are obtained through speed reduction transmission systems. An analytical study of the finger, including forward and inverse kinematics and differential kinematics analyses, static force analysis, and computation of joint velocity profiles for straight-line motion of the fingertip, has been carried out. The results of these analyses have been used to develop the control program for the finger, as well as a versatile simulation tool that can be used to optimise future designs of the finger. The simulation program has been validated by comparison to the results of tests carried out on the prototype finger. The ultimate aim of the work is to produce a dexterous robot hand to be used in a flexible manufacturing environment in industry or as a prosthetic device.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Mifsud, N., Grech, A., Saliba, M. A., & Fabri, S. G. (2006). Development of an anthropomorphic robot finger : mechanical and kinematic aspects. OAR@UM (University of Malta). https://www.um.edu.mt/library/oar//handle/123456789/29464
MLA 9
Mifsud, Nathaniel, et al. “Development of an anthropomorphic robot finger : mechanical and kinematic aspects.” OAR@UM (University of Malta), 2006. https://www.um.edu.mt/library/oar//handle/123456789/29464.
Chicago
Mifsud, Nathaniel, Audrey Grech, Michael A. Saliba, and Simon G. Fabri. 2006. “Development of an anthropomorphic robot finger : mechanical and kinematic aspects.” OAR@UM (University of Malta). https://www.um.edu.mt/library/oar//handle/123456789/29464.
Harvard
Mifsud, N. et al. (2006) ‘Development of an anthropomorphic robot finger : mechanical and kinematic aspects’, OAR@UM (University of Malta). Available at: https://www.um.edu.mt/library/oar//handle/123456789/29464.
IEEE
N. Mifsud, A. Grech, M. A. Saliba, and S. G. Fabri, “Development of an anthropomorphic robot finger : mechanical and kinematic aspects,” OAR@UM (University of Malta), 2006.
BibTeX
@article{mifsud2006development,
title = {{Development of an anthropomorphic robot finger : mechanical and kinematic aspects}},
author = {Mifsud, Nathaniel and Grech, Audrey and Saliba, Michael A. and Fabri, Simon G.},
journal = {OAR@UM (University of Malta)},
year = {2006},
url = {https://www.um.edu.mt/library/oar//handle/123456789/29464}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Control and Systems Engineering › Robotic Mechanisms and Dynamics
- robotic fingers
- anthropomorphic hand
- dexterous manipulation
- kinematic analysis
- forward and inverse kinematics
- differential kinematics
- static force analysis
- prosthesis
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Mifsud, N., Grech, A., Saliba, M. A., & Fabri, S. G. (2006). Development of an anthropomorphic robot finger : mechanical and kinematic aspects. OAR@UM (University of Malta). https://www.um.edu.mt/library/oar//handle/123456789/29464
How many times has this paper been cited?
3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at OAR@UM (University of Malta): sign in and open the full text from this page.
Who wrote this paper?
Nathaniel Mifsud, Audrey Grech, Michael A. Saliba, Simon G. Fabri.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.