Journal article · 2021 · Open access

Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution

C. Oulmas, Sonia Mameri, Dalila Boughrara, Slimane Boutarfaia, J. Delhalle, Zineb Mekhalif, A. Kadri

Journal of The Electrochemical Society, 168(3), 031514 · Published 1 March 2021 · DOI 10.1149/1945-7111/abec96

Open PDFView at the publisherCite this paper

In brief

“Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution” is a 2021 journal article by C. Oulmas and 6 co-authors, published in Journal of The Electrochemical Society. OpenAlex counts 10 citations as of 22 November 2026. It is open access: the full text is free to read at Journal of The Electrochemical Society.

Citations
10
Most cited in
2026 (4)
Field-weighted impact
0.33
References
89
Authors
7

Abstract

In this work, two aluminum alloys, Al-5Zn-0.5Sn and Al-5Zn-0.5Sn-2.6Mg, were prepared by melting in an induction furnace to be used as sacrificial anodes for cathodic protection of marine structures. The alloys are characterized by scanning electron microscopy mapping coupled to energy dispersive X-ray analysis, X-ray photoelectron spectroscopy and X-ray diffraction. Afterwards, the corrosion behavior was studied in 3 wt.% NaCl solution through immersion tests, potentiodynamic polarization, electrochemical impedance spectroscopy and weight-loss measurements. Results display that active dissolution of Al-5%Zn-0.5%Sn-2.6%Mg alloy and its quasi-uniform corrosion is associated with the major precipitates MgZn 2 and Mg 2 Sn particles formed during the melting process. Galvanic coupling measurements over 45 d were carried out on both alloys. The sacrificial cathodic protection of both anodes was successful but the couple efficiency was greater for Al-Zn-Sn-Mg owing to its more negative corrosion potential and uniform dissolution.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Oulmas, C., Mameri, S., Boughrara, D., Boutarfaia, S., Delhalle, J., Mekhalif, Z., & Kadri, A. (2021). Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution. Journal of The Electrochemical Society, 168(3), 031514. https://doi.org/10.1149/1945-7111/abec96

MLA 9

Oulmas, C., et al. “Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution.” Journal of The Electrochemical Society, vol. 168, no. 3, 2021, p. 031514. https://doi.org/10.1149/1945-7111/abec96.

Chicago

Oulmas, C., Sonia Mameri, Dalila Boughrara, Slimane Boutarfaia, J. Delhalle, Zineb Mekhalif, and A. Kadri. 2021. “Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution.” Journal of The Electrochemical Society 168 (3): 031514. https://doi.org/10.1149/1945-7111/abec96.

Harvard

Oulmas, C. et al. (2021) ‘Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution’, Journal of The Electrochemical Society, 168(3), p. 031514. doi:10.1149/1945-7111/abec96.

IEEE

C. Oulmas et al., “Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution,” Journal of The Electrochemical Society, vol. 168, no. 3, p. 031514, 2021, doi: 10.1149/1945-7111/abec96.

BibTeX

@article{oulmas2021development,
  title     = {{Development of Al-5\%Zn-0.5\%Sn-2.6\%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.\% NaCl Solution}},
  author    = {Oulmas, C. and Mameri, Sonia and Boughrara, Dalila and Boutarfaia, Slimane and Delhalle, J. and Mekhalif, Zineb and Kadri, A.},
  journal   = {Journal of The Electrochemical Society},
  year      = {2021},
  volume    = {168},
  number    = {3},
  pages     = {031514},
  doi       = {10.1149/1945-7111/abec96},
  url       = {https://doi.org/10.1149/1945-7111/abec96}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202233
202311
202411
202511
202644

Its field-weighted citation impact is 0.33: it has been cited 0.33 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition

  • sacrificial anodes
  • cathodic protection
  • steel corrosion
  • marine structures
  • NaCl solution
  • galvanic coupling
  • MgZn2 precipitates
  • Mg2Sn precipitates

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Oulmas, C., Mameri, S., Boughrara, D., Boutarfaia, S., Delhalle, J., Mekhalif, Z., & Kadri, A. (2021). Development of Al-5%Zn-0.5%Sn-2.6%Mg Alloy as Sacrificial Anode for Cathodic Protection of Steel in 3 wt.% NaCl Solution. Journal of The Electrochemical Society, 168(3), 031514. https://doi.org/10.1149/1945-7111/abec96

How many times has this paper been cited?

10 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of The Electrochemical Society: sign in and open the PDF from this page.

Who wrote this paper?

C. Oulmas, Sonia Mameri, Dalila Boughrara, Slimane Boutarfaia, J. Delhalle, Zineb Mekhalif, A. Kadri.

What is the DOI of this paper?

10.1149/1945-7111/abec96, permanently at https://doi.org/10.1149/1945-7111/abec96. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.