Report · 2012 · Open access

Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools

Willey Yun Hsien Liew, Yee Yan Lim

UMS Institutional Repository (Universiti Malaysia Sabah) · Published 1 January 2012

Open PDFView at the publisherCite this paper

In brief

“Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools” is a 2012 report by Willey Yun Hsien Liew and Yee Yan Lim, published in UMS Institutional Repository (Universiti Malaysia Sabah). OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at UMS Institutional Repository (Universiti Malaysia Sabah).

Citations
0
Authors
2

Abstract

This work examines the frictional and wear behaviour of AlCrN, TiN, TiAlN single­layer coatings, and TiAlN/AlCrN, AlN/TiN nano-multilayer coatings in dry sliding. Comparative studies on the coatings sliding in air and vacuum environment at different speeds provided important insight on the effect of oxidation and temperature on the frictional and wear behaviour of the coatings. Among all the single-layer coatings tested in vacuum, TiN gave the lowest coefficient of friction (COF), followed by TiAlN and AlCrN This indicated that TiN was the most lubricous coating. At 10 m/min in ambient air in which oxidation took place, AlCrN gave the lowest COF, followed by TiN and TiAlN Among the two types of nano-multilayer coatings tested in vacuum and air, the AlCrN/TiAlN produced lower COF. The characteristics of the COF produced by AlCrN/TiAlN and AlN/TiN in vacuum and air was similar to those produced Qy TiAlN and TiN, respectively. This showed that the COF of these nano-multilayer coatings was governed by TiAlN and TiN AlCrN exhibited the highest wear resistance. TiAlN had the lowest wear resistance. TiN, TiAlN/AlCrN and AlN/TiN which exhibited similar wear resistance, had lower wear resistance than AlCrN but higher wear resistance than TiAlN In air, increasing the speed from 10 m/min to 100 m/min resulted in a 'reduction in COF for all coatings, except AlCrN

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Liew, W. Y. H., & Lim, Y. Y. (2012). Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools. UMS Institutional Repository (Universiti Malaysia Sabah). https://eprints.ums.edu.my/id/eprint/24834/1/Development%20of%20AICrN%20TiAIN%20AIN%20TiN%20nano-coatings%20for%20cutting%20tools.pdf

MLA 9

Liew, Willey Yun Hsien, and Yee Yan Lim. “Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools.” UMS Institutional Repository (Universiti Malaysia Sabah), 2012. https://eprints.ums.edu.my/id/eprint/24834/1/Development%20of%20AICrN%20TiAIN%20AIN%20TiN%20nano-coatings%20for%20cutting%20tools.pdf.

Chicago

Liew, Willey Yun Hsien and Yee Yan Lim. 2012. “Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools.” UMS Institutional Repository (Universiti Malaysia Sabah). https://eprints.ums.edu.my/id/eprint/24834/1/Development%20of%20AICrN%20TiAIN%20AIN%20TiN%20nano-coatings%20for%20cutting%20tools.pdf.

Harvard

Liew, W. Y. H. and Lim, Y. Y. (2012) ‘Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools’, UMS Institutional Repository (Universiti Malaysia Sabah). Available at: https://eprints.ums.edu.my/id/eprint/24834/1/Development%20of%20AICrN%20TiAIN%20AIN%20TiN%20nano-coatings%20for%20cutting%20tools.pdf.

IEEE

W. Y. H. Liew and Y. Y. Lim, “Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools,” UMS Institutional Repository (Universiti Malaysia Sabah), 2012.

BibTeX

@article{liew2012development,
  title     = {{Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools}},
  author    = {Liew, Willey Yun Hsien and Lim, Yee Yan},
  journal   = {UMS Institutional Repository (Universiti Malaysia Sabah)},
  year      = {2012},
  url       = {https://eprints.ums.edu.my/id/eprint/24834/1/Development%20of%20AICrN%20TiAIN%20AIN%20TiN%20nano-coatings%20for%20cutting%20tools.pdf}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • AlCrN coating
  • TiAlN coating
  • TiN coating
  • AlN coatings
  • tool coatings
  • dry sliding wear
  • friction coefficient
  • oxidation effects

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Liew, W. Y. H., & Lim, Y. Y. (2012). Development of AICrN/TiAIN/AIN/TiN nano-coatings for cutting tools. UMS Institutional Repository (Universiti Malaysia Sabah). https://eprints.ums.edu.my/id/eprint/24834/1/Development%20of%20AICrN%20TiAIN%20AIN%20TiN%20nano-coatings%20for%20cutting%20tools.pdf

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at UMS Institutional Repository (Universiti Malaysia Sabah): sign in and open the PDF from this page.

Who wrote this paper?

Willey Yun Hsien Liew, Yee Yan Lim.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.