Dissertation · 2019 · Open access

Development of a-SiGe:H: from material characterization to multi-junction device

Steven J. Roerink

Research Repository (Delft University of Technology) · Published 1 January 2019

Free PDFView at the publisherCite this paper

In brief

“Development of a-SiGe:H: from material characterization to multi-junction device” is a 2019 dissertation by Steven J. Roerink, published in Research Repository (Delft University of Technology). OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at Research Repository (Delft University of Technology).

Citations
0
Authors
1

Abstract

Multi-junction solar cells with Si alloys have true potential for high conversion efficiency, because of the spectrum splitting capability. For optimal spectral utilization, a multi-junction silicon based device needs a silicon alloy with a bandgap between that of nc-Si (1.1 eV) and a-Si (1.8 eV). a-SiGe:H has a tunable bandgap between 1.4-1.6 eV by varying the GeH4 flow rate in the layer. An investigation of deposition parameters on PECVD processed a-SiGe:H films showed that variation of the GeH4/SiH4 flow rate is the most influential deposition parameter to achieve bandgap tuning. It influences the optical-, electrical- and material properties due to the fact that it directly changes the GeH4 flow rate in the material. Subsequently, a n-i-p substrate single junction a-SiGe:H solar cell is fabricated. This is the reversed p-i-n superstrate a-SiGe:H solar cell, fabricated by the PVMD group. It has a Voc of 508 mV, a FF of 0.39, a Jsc of 9.9 mA/cm2 and a final efficiency of 2.9%. Due to the low performance, manipulation techniques were introduced. The different proposed shapes consist of bandgap grading in the absorber through GeH4 flow rate profiling. A study on buffer type and thickness, different profiling schemes, grading widths and total absorber thickness strongly improved the device performance. The overall champion single junction a-SiGe:H solar cell has a 3.2 nm n/i i-a-Si buffer combined with a 5 nm n/i i-a-SiGe:H buffer, a V-shape GeH4 peak flow rate of 2.4 sccm, a 134 nm n/i grading width, a 36 nm i/p grading width and a total absorber thickness of 170 nm. This cell generates a Voc of 735 mV, a FF of 0.64, a Jsc of 13.23 mA/cm2 and a final efficiency of 6.18%. This is a relative increase of 113.8% in efficiency. The single junction solar cell fabrication is followed by demonstration of a two-junction device. The overall champion tandem solar cell consists of a 200 nm a-Si:H top cell and a 170 nm a-SiGe:H bottom cell with a V-shape GeH4 peak flow rate of 5.3 sccm. This champion tandem solar cell generates a Voc of 1395 mV, a FF of 0.69, a current limiting Jsc of 8.34 mA/cm2 and a final efficiency of 7.99%. Finally, research proved that the change in top and bottom cell thickness, the maximum GeH4 flow rate and the U- and V-shape profiles are interesting manipulation techniques in a multi-junction device due to their flexibility to increase the current limiting Jsc and improve current matching.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Roerink, S. J. (2019). Development of a-SiGe:H: from material characterization to multi-junction device. Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:604b767e-f816-4120-8bf0-6d9aaba0306b

MLA 9

Roerink, Steven J. “Development of a-SiGe:H: from material characterization to multi-junction device.” Research Repository (Delft University of Technology), 2019. http://resolver.tudelft.nl/uuid:604b767e-f816-4120-8bf0-6d9aaba0306b.

Chicago

Roerink, Steven J. 2019. “Development of a-SiGe:H: from material characterization to multi-junction device.” Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:604b767e-f816-4120-8bf0-6d9aaba0306b.

Harvard

Roerink, S. J. (2019) ‘Development of a-SiGe:H: from material characterization to multi-junction device’, Research Repository (Delft University of Technology). Available at: http://resolver.tudelft.nl/uuid:604b767e-f816-4120-8bf0-6d9aaba0306b.

IEEE

S. J. Roerink, “Development of a-SiGe:H: from material characterization to multi-junction device,” Research Repository (Delft University of Technology), 2019.

BibTeX

@phdthesis{roerink2019development,
  title     = {{Development of a-SiGe:H: from material characterization to multi-junction device}},
  author    = {Roerink, Steven J.},
  year      = {2019},
  url       = {http://resolver.tudelft.nl/uuid:604b767e-f816-4120-8bf0-6d9aaba0306b}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • a-SiGe:H
  • multijunction solar cells
  • tandem solar cells
  • band gap tuning
  • PECVD deposition
  • graded band gap
  • n-i-p solar cells
  • single-junction solar cells

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Roerink, S. J. (2019). Development of a-SiGe:H: from material characterization to multi-junction device. Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:604b767e-f816-4120-8bf0-6d9aaba0306b

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Research Repository (Delft University of Technology).

Who wrote this paper?

Steven J. Roerink.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.