Conference paper · 2024 · Open access
Development of a Novel Origami Paper-Based Gripper
International Conference on Computational & Experimental Engineering and Sciences, 32(2), 1–2 · Published 1 January 2024 · DOI 10.32604/icces.2024.012510
In brief
“Development of a Novel Origami Paper-Based Gripper” is a 2024 conference paper by Johan J. Nunez-Quispe and 8 co-authors, published in International Conference on Computational & Experimental Engineering and Sciences. OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at International Conference on Computational & Experimental Engineering and Sciences.
- Citations
- 1
- Most cited in
- 2026 (1)
- Field-weighted impact
- 0.35
- Authors
- 9
Abstract
The present research proposes a new way to design and develop a robotic gripper with a superior response in terms of controlled motion, low weight, and construction complexity. The proposed gripper design involves an innovative, cost-effective, utilizing origami-based engineering to overcome the complexities and high costs associated with conventional grippers. We developed a lightweight origami gripper that transitions from a square to a rhombus shape through simple manual folding. This type of device has specific features depending on how folding lines are placed, design parameters, folding orientation, and material thickness. This transformation enables efficient grasping and gap bridging, a significant advancement over the limited capabilities of traditional paper- based origami grippers. The proposed prototype of the gripper was tested in two main different materials, cardstock paper, and plastic sheet, both of which were able to hold most common objects properly such as a stuffed toy, phone stand, bottle cap, wine cork, magic cube, and similar-sized items. However, in terms of lifted weight, the plastic gripper performed better during the lifting tests which were performed using a bottle of water, a scale, and identifying the maximum weight it can hold. A key aspect of our research is the geometric analysis of the gripper’s transformation, focusing on how the control angle influences the gripper’s final shape and functionality. An analytical model was developed to figure out how manual folding, specifically the angular displacement input, moves each folding line in the origami and establishes three types of folding lines in the presented origami which are valley, mountain, and contour lines. After this process, some equations were calculated to characterize this motion working with three major angle parameters alpha, beta, and gamma. This workflow validates the proposed origami gripper in three major aspects; analytical modeling using angular parametric equations, computational simulation performed using Rigid Body Dynamics (RBD) and finite element (FEM) methods as well as the lifting weight experiment to evaluate its limitations. The experimental test confirms what the theoretical analysis and computational simulation outlined regarding the predicted motion and maximum angle it can reach to close the gap. Moreover, the simulation showed and quantified critical stress zones across the origami, which are the side internal corners for the lifting experiment modeled as a side force of each contact surface of the gripper. In that sense this research allowed us to figure out the interplay between these factors mathematically, enhancing our comprehension of origami-based gripper's mechanics. Regarding the theoretical and simulation results, they closely align with analytical estimations, assuring the versatility of this design.…
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Nunez-Quispe, J. J., Liu, F., Ming, I., Liu, V., Xu, R.-G., Jiang, L., Gonzales-Martell, A. A., Xiu, H., & Chen, Z. (2024). Development of a Novel Origami Paper-Based Gripper. International Conference on Computational & Experimental Engineering and Sciences, 32(2), 1–2. https://doi.org/10.32604/icces.2024.012510
MLA 9
Nunez-Quispe, Johan J., et al. “Development of a Novel Origami Paper-Based Gripper.” International Conference on Computational & Experimental Engineering and Sciences, vol. 32, no. 2, 2024, pp. 1–2. https://doi.org/10.32604/icces.2024.012510.
Chicago
Nunez-Quispe, Johan J., Fan Liu, Isaac Ming, Vanessa Liu, Rong-Guang Xu, Litong Jiang, Adriel A. Gonzales-Martell, Haning Xiu, and Zi Chen. 2024. “Development of a Novel Origami Paper-Based Gripper.” International Conference on Computational & Experimental Engineering and Sciences 32 (2): 1–2. https://doi.org/10.32604/icces.2024.012510.
Harvard
Nunez-Quispe, J. J. et al. (2024) ‘Development of a Novel Origami Paper-Based Gripper’, International Conference on Computational & Experimental Engineering and Sciences, 32(2), pp. 1–2. doi:10.32604/icces.2024.012510.
IEEE
J. J. Nunez-Quispe et al., “Development of a Novel Origami Paper-Based Gripper,” International Conference on Computational & Experimental Engineering and Sciences, vol. 32, no. 2, pp. 1–2, 2024, doi: 10.32604/icces.2024.012510.
BibTeX
@inproceedings{nunezquispe2024development,
title = {{Development of a Novel Origami Paper-Based Gripper}},
author = {Nunez-Quispe, Johan J. and Liu, Fan and Ming, Isaac and Liu, Vanessa and Xu, Rong-Guang and Jiang, Litong and Gonzales-Martell, Adriel A. and Xiu, Haning and Chen, Zi},
booktitle = {International Conference on Computational \& Experimental Engineering and Sciences},
year = {2024},
volume = {32},
number = {2},
pages = {1--2},
doi = {10.32604/icces.2024.012510},
url = {https://doi.org/10.32604/icces.2024.012510}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Control and Systems Engineering › Robotic Mechanisms and Dynamics
- robotic gripper
- shape transformation
- gap bridging
- grasping
- angular displacement
- analytical model
- rigid body dynamics
- finite element analysis
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Nunez-Quispe, J. J., Liu, F., Ming, I., Liu, V., Xu, R.-G., Jiang, L., Gonzales-Martell, A. A., Xiu, H., & Chen, Z. (2024). Development of a Novel Origami Paper-Based Gripper. International Conference on Computational & Experimental Engineering and Sciences, 32(2), 1–2. https://doi.org/10.32604/icces.2024.012510
How many times has this paper been cited?
1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Conference on Computational & Experimental Engineering and Sciences: sign in and open the PDF from this page.
Who wrote this paper?
Johan J. Nunez-Quispe, Fan Liu, Isaac Ming, Vanessa Liu, Rong-Guang Xu, Litong Jiang, Adriel A. Gonzales-Martell, Haning Xiu, Zi Chen.
What is the DOI of this paper?
10.32604/icces.2024.012510, permanently at https://doi.org/10.32604/icces.2024.012510. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.