Journal article · 2022 · Open access
Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries
SusMat, 2(1), 34–64 · Published 24 January 2022 · DOI 10.1002/sus2.42
In brief
“Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries” is a 2022 journal article by Hongtai Li and 2 co-authors, published in SusMat. OpenAlex counts 193 citations as of 19 November 2026, which puts it in the top 1% of works published in 2022 by citations. It is open access under a CC BY licence: the full text is free to read at SusMat.
- Citations
- 193
- Most cited in
- 2025 (49)
- Field-weighted impact
- 10.90
- References
- 256
- Authors
- 3
Abstract
As one of the most promising candidates for next‐generation energy storage systems, lithium‐sulfur (Li‐S) batteries have gained wide attention owing to their ultrahigh theoretical energy density and low cost. Nevertheless, their road to commercial application is still full of thorns due to the inherent sluggish redox kinetics and severe polysulfides shuttle. Incorporating sulfur cathodes with adsorbents/catalysts has been proposed to be an effective strategy to address the foregoing challenges, whereas the complexity of sulfur cathodes resulting from the intricate design parameters greatly influences the corresponding energy density, which has been frequently ignored. In this review, the recent progress in design strategies of advanced sulfur cathodes is summarized and the significance of compatible regulation among sulfur active materials, tailored hosts, and elaborate cathode configuration is clarified, aiming to bridge the gap between fundamental research and practical application of Li‐S batteries. The representative strategies classified by sulfur encapsulation, host architecture, and cathode configuration are first highlighted to illustrate their synergetic contribution to the electrochemical performance improvement. Feasible integration principles are also proposed to guide the practical design of advanced sulfur cathodes. Finally, prospects and future directions are provided to realize high energy density and long‐life Li‐S batteries.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Li, H., Li, Y., & Zhang, L. (2022). Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries. SusMat, 2(1), 34–64. https://doi.org/10.1002/sus2.42
MLA 9
Li, Hongtai, et al. “Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries.” SusMat, vol. 2, no. 1, 2022, pp. 34–64. https://doi.org/10.1002/sus2.42.
Chicago
Li, Hongtai, Yanguang Li, and Liang Zhang. 2022. “Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries.” SusMat 2 (1): 34–64. https://doi.org/10.1002/sus2.42.
Harvard
Li, H., Li, Y. and Zhang, L. (2022) ‘Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries’, SusMat, 2(1), pp. 34–64. doi:10.1002/sus2.42.
IEEE
H. Li, Y. Li, and L. Zhang, “Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries,” SusMat, vol. 2, no. 1, pp. 34–64, 2022, doi: 10.1002/sus2.42.
BibTeX
@article{li2022designing,
title = {{Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries}},
author = {Li, Hongtai and Li, Yanguang and Zhang, Liang},
journal = {SusMat},
year = {2022},
volume = {2},
number = {1},
pages = {34--64},
doi = {10.1002/sus2.42},
url = {https://doi.org/10.1002/sus2.42}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 27 | |
| 2023 | 41 | |
| 2024 | 46 | |
| 2025 | 49 | |
| 2026 | 30 |
Its field-weighted citation impact is 10.90: it has been cited 10.90 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- lithium-sulfur batteries
- sulfur cathode
- polysulfide shuttle effect
- sulfur encapsulation
- cathode configuration
- redox kinetics
- energy density
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Li, H., Li, Y., & Zhang, L. (2022). Designing principles of advanced sulfur cathodes toward practical lithium‐sulfur batteries. SusMat, 2(1), 34–64. https://doi.org/10.1002/sus2.42
How many times has this paper been cited?
193 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at SusMat: sign in and open the PDF from this page.
Who wrote this paper?
Hongtai Li, Yanguang Li, Liang Zhang.
What is the DOI of this paper?
10.1002/sus2.42, permanently at https://doi.org/10.1002/sus2.42. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.