Journal article · 2019 · Open access

Design process and simulation testing of a shape memory alloy actuated robotic microgripper

H. Llewellyn-Evans, Christian Andrew Griffiths, Ashraf Fahmy

Microsystem Technologies, 26(3), 885–900 · Published 3 September 2019 · DOI 10.1007/s00542-019-04599-6

Open PDFView at the publisherCite this paper

In brief

“Design process and simulation testing of a shape memory alloy actuated robotic microgripper” is a 2019 journal article by H. Llewellyn-Evans and 2 co-authors, published in Microsystem Technologies. OpenAlex counts 18 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Microsystem Technologies.

Citations
18
Most cited in
2026 (5)
Field-weighted impact
0.51
References
29
Authors
3

Abstract

Microgrippers are commonly used for micromanipulation of micro-objects with dimensions from 1 to 100 µm and attain features of reliable accuracy, low cost, wide jaw aperture and variable applied force. This paper studies the design process, simulation, and testing of a microgripper which can manipulate and assemble a platinum resistance temperature probe, made from a 25 µm diameter platinum wire, a 20 mm diameter tinned copper wire, and a printed circuit board type connector. Various microgripper structures and actuator types were researched and reviewed to determine the most suitable design for the required micromanipulation task. Operation tests using SolidWorks and ANSYS software were conducted to test a parallelogram structure with flexible single-notch hinges. The best suited material was found to be Aluminium alloy 7075-T6 as it was capable of producing a large jaw tip displacement of 0.7 mm without exceeding its tensile yield strength limit. A shape memory alloy was chosen as a choice of actuator to close the microgripper jaws. To ensure a repeatably accurate datum point, the final microgripper consisted of a fixed arm and a flexible arm. An optimisation process using ANSYS studied the hinge thickness and radius dimensions of the microgripper which improved its deflection whilst reducing the experienced stress.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Llewellyn-Evans, H., Griffiths, C. A., & Fahmy, A. (2019). Design process and simulation testing of a shape memory alloy actuated robotic microgripper. Microsystem Technologies, 26(3), 885–900. https://doi.org/10.1007/s00542-019-04599-6

MLA 9

Llewellyn-Evans, H., et al. “Design process and simulation testing of a shape memory alloy actuated robotic microgripper.” Microsystem Technologies, vol. 26, no. 3, 2019, pp. 885–900. https://doi.org/10.1007/s00542-019-04599-6.

Chicago

Llewellyn-Evans, H., Christian Andrew Griffiths, and Ashraf Fahmy. 2019. “Design process and simulation testing of a shape memory alloy actuated robotic microgripper.” Microsystem Technologies 26 (3): 885–900. https://doi.org/10.1007/s00542-019-04599-6.

Harvard

Llewellyn-Evans, H., Griffiths, C. A. and Fahmy, A. (2019) ‘Design process and simulation testing of a shape memory alloy actuated robotic microgripper’, Microsystem Technologies, 26(3), pp. 885–900. doi:10.1007/s00542-019-04599-6.

IEEE

H. Llewellyn-Evans, C. A. Griffiths, and A. Fahmy, “Design process and simulation testing of a shape memory alloy actuated robotic microgripper,” Microsystem Technologies, vol. 26, no. 3, pp. 885–900, 2019, doi: 10.1007/s00542-019-04599-6.

BibTeX

@article{llewellynevans2019design,
  title     = {{Design process and simulation testing of a shape memory alloy actuated robotic microgripper}},
  author    = {Llewellyn-Evans, H. and Griffiths, Christian Andrew and Fahmy, Ashraf},
  journal   = {Microsystem Technologies},
  year      = {2019},
  volume    = {26},
  number    = {3},
  pages     = {885--900},
  doi       = {10.1007/s00542-019-04599-6},
  url       = {https://doi.org/10.1007/s00542-019-04599-6}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202022
202133
202211
202344
202433
202655

Its field-weighted citation impact is 0.51: it has been cited 0.51 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies

  • shape memory alloy actuators
  • micromanipulation
  • microassembly
  • flexible hinges
  • jaw displacement
  • stress reduction

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Llewellyn-Evans, H., Griffiths, C. A., & Fahmy, A. (2019). Design process and simulation testing of a shape memory alloy actuated robotic microgripper. Microsystem Technologies, 26(3), 885–900. https://doi.org/10.1007/s00542-019-04599-6

How many times has this paper been cited?

18 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Microsystem Technologies: sign in and open the PDF from this page.

Who wrote this paper?

H. Llewellyn-Evans, Christian Andrew Griffiths, Ashraf Fahmy.

What is the DOI of this paper?

10.1007/s00542-019-04599-6, permanently at https://doi.org/10.1007/s00542-019-04599-6. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.