Journal article · 2025 · Open access

Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper

Xiaoyu Meng, Jiaqing Xie, Haoran Pang, Wenchao Wei, Jiping Niu, Ming-Qiang Zhu, Fang Gu, Xiaohuan Fan, Haiyan Fan

Micromachines, 16(1), 107 · Published 19 January 2025 · DOI 10.3390/mi16010107

Open PDFView at the publisherCite this paper

In brief

“Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper” is a 2025 journal article by Xiaoyu Meng and 8 co-authors, published in Micromachines. OpenAlex counts 11 citations as of 22 November 2026, which puts it in the top 5% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Micromachines.

Citations
11
Most cited in
2026 (8)
Field-weighted impact
1.43
References
44
Authors
9

Abstract

Dielectric elastomer actuators (DEAs) are difficult to apply to flexible grippers due to their small deformation range and low output force. Hence, a DEA with a large bending deformation range and output force was designed, and a corresponding flexible gripper was developed to realize the function of grasping objects of different shapes. The relationship between the pre-stretch ratio and DEA deformation degree was tested by experiments. Based on the performance test results of the dielectric elastomer (DE), the bending deformation process of DEAs with different shapes was simulated by Finite Element Method (FEM) simulation. DEAs with different shapes were prepared through laser cutting and the relationship between the voltage and the bending angle, and the output force of the DEAs was measured. The result shows that under uniaxial stretching, the deformation of the DEA in the stretching direction gradually increases and decreases in the unstretched direction with the increase in the pre-stretch ratio. Under biaxial stretching, DEA deformation increases with the increase in the pre-stretch ratio. The shape of the DEA has a certain influence on the bending deformation range under the same conditions, and the elliptical DEA has a larger bending deformation range and higher output force compared with the rectangular DEA and the trapezium DEA. The elliptical DEA can produce a bending deformation of 40° and an output force of 37.2 mN at a voltage of 24 kV. The three-finger flexible gripper composed of an elliptical DEA can realize the grasping of a paper cup.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Meng, X., Xie, J., Pang, H., Wei, W., Niu, J., Zhu, M.-Q., Gu, F., Fan, X., & Fan, H. (2025). Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper. Micromachines, 16(1), 107. https://doi.org/10.3390/mi16010107

MLA 9

Meng, Xiaoyu, et al. “Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper.” Micromachines, vol. 16, no. 1, 2025, p. 107. https://doi.org/10.3390/mi16010107.

Chicago

Meng, Xiaoyu, Jiaqing Xie, Haoran Pang, Wenchao Wei, Jiping Niu, Ming-Qiang Zhu, Fang Gu, Xiaohuan Fan, and Haiyan Fan. 2025. “Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper.” Micromachines 16 (1): 107. https://doi.org/10.3390/mi16010107.

Harvard

Meng, X. et al. (2025) ‘Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper’, Micromachines, 16(1), p. 107. doi:10.3390/mi16010107.

IEEE

X. Meng et al., “Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper,” Micromachines, vol. 16, no. 1, p. 107, 2025, doi: 10.3390/mi16010107.

BibTeX

@article{meng2025design,
  title     = {{Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper}},
  author    = {Meng, Xiaoyu and Xie, Jiaqing and Pang, Haoran and Wei, Wenchao and Niu, Jiping and Zhu, Ming-Qiang and Gu, Fang and Fan, Xiaohuan and Fan, Haiyan},
  journal   = {Micromachines},
  year      = {2025},
  volume    = {16},
  number    = {1},
  pages     = {107},
  doi       = {10.3390/mi16010107},
  url       = {https://doi.org/10.3390/mi16010107}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators

  • dielectric elastomer actuators
  • flexible gripper
  • output force
  • biaxial stretching
  • uniaxial stretching
  • three-finger gripper

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Meng, X., Xie, J., Pang, H., Wei, W., Niu, J., Zhu, M.-Q., Gu, F., Fan, X., & Fan, H. (2025). Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper. Micromachines, 16(1), 107. https://doi.org/10.3390/mi16010107

How many times has this paper been cited?

11 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Micromachines: sign in and open the PDF from this page.

Who wrote this paper?

Xiaoyu Meng, Jiaqing Xie, Haoran Pang, Wenchao Wei, Jiping Niu, Ming-Qiang Zhu, Fang Gu, Xiaohuan Fan, Haiyan Fan.

What is the DOI of this paper?

10.3390/mi16010107, permanently at https://doi.org/10.3390/mi16010107. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.