Conference paper · 2019 · Open access

Design of a Highly Biomimetic and Fully-Actuated Robotic Finger

Li Tian, Nadia Magnenat‐Thalmann, Jianmin Zheng, Daniël Thalmann

IEEE Symposium Series on Computational Intelligence (SSCI), 2019, 2382–2387 · Published 1 December 2019 · DOI 10.1109/ssci44817.2019.9002870

Open full textView at the publisherCite this paper

In brief

“Design of a Highly Biomimetic and Fully-Actuated Robotic Finger” is a 2019 conference paper by Li Tian and 3 co-authors, published in IEEE Symposium Series on Computational Intelligence (SSCI). OpenAlex counts 7 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Infoscience (Ecole Polytechnique Fédérale de Lausanne).

Citations
7
Most cited in
2021 (2)
Field-weighted impact
1.53
References
24
Authors
4

Abstract

During design a mechanical structure such as a robotic finger, modeling parts and designing joints are two timeconsuming steps. This paper presents a method for design and fabrication of a humanoid robotic finger that intends to mimic the human finger in terms of tendon, bones, ligaments and the pulley systems which aims to generate a mechanism rapidly. The method is inspired by the anatomy and biomechanics of human hand, and focuses on bones, joints and actuation systems, with the aim of creating a customised finger that has the similar degrees of freedom and ranges of motion of a human finger. Specifically, we propose to create the personalised 3D models of finger's bones by adapting a template to the data acquired by scanning the real hand, which are then fabricated by 3D printing. Low cost and easy-to-get materials such as Nylon cables and silicon rubber are used to build the tendon sheaths and the joints. We design a "3 layer cascade cable driven system" built upon eight driven cables and four servo motors for simulating all possible four Degree of Freedom (DOF) of the finger. As a result, we present a highly biomimetic and fully-actuated robotic finger, which can achieve more DOFs and larger ranges of motion compared to existing humanoid robotic hands. Particularly, the experiments validate that our robotic finger is capable of achieving all 11 standard finger gestures as a human fìnger.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Tian, L., Magnenat‐Thalmann, N., Zheng, J., & Thalmann, D. (2019). Design of a Highly Biomimetic and Fully-Actuated Robotic Finger. IEEE Symposium Series on Computational Intelligence (SSCI), 2019, 2382–2387. https://doi.org/10.1109/ssci44817.2019.9002870

MLA 9

Tian, Li, et al. “Design of a Highly Biomimetic and Fully-Actuated Robotic Finger.” IEEE Symposium Series on Computational Intelligence (SSCI), vol. 2019, 2019, pp. 2382–2387. https://doi.org/10.1109/ssci44817.2019.9002870.

Chicago

Tian, Li, Nadia Magnenat‐Thalmann, Jianmin Zheng, and Daniël Thalmann. 2019. “Design of a Highly Biomimetic and Fully-Actuated Robotic Finger.” IEEE Symposium Series on Computational Intelligence (SSCI) 2019: 2382–2387. https://doi.org/10.1109/ssci44817.2019.9002870.

Harvard

Tian, L. et al. (2019) ‘Design of a Highly Biomimetic and Fully-Actuated Robotic Finger’, IEEE Symposium Series on Computational Intelligence (SSCI), 2019, pp. 2382–2387. doi:10.1109/ssci44817.2019.9002870.

IEEE

L. Tian, N. Magnenat‐Thalmann, J. Zheng, and D. Thalmann, “Design of a Highly Biomimetic and Fully-Actuated Robotic Finger,” IEEE Symposium Series on Computational Intelligence (SSCI), vol. 2019, pp. 2382–2387, 2019, doi: 10.1109/ssci44817.2019.9002870.

BibTeX

@inproceedings{tian2019design,
  title     = {{Design of a Highly Biomimetic and Fully-Actuated Robotic Finger}},
  author    = {Tian, Li and Magnenat‐Thalmann, Nadia and Zheng, Jianmin and Thalmann, Daniël},
  booktitle = {IEEE Symposium Series on Computational Intelligence (SSCI)},
  year      = {2019},
  volume    = {2019},
  pages     = {2382--2387},
  doi       = {10.1109/ssci44817.2019.9002870},
  url       = {https://doi.org/10.1109/ssci44817.2019.9002870}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202122
202211
202322
202511

Its field-weighted citation impact is 1.53: it has been cited 1.53 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • robotic fingers
  • biomimetic design
  • tendon-driven mechanism
  • cable-driven actuation
  • servo motor
  • degrees of freedom
  • finger gestures
  • human hand biomechanics

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Tian, L., Magnenat‐Thalmann, N., Zheng, J., & Thalmann, D. (2019). Design of a Highly Biomimetic and Fully-Actuated Robotic Finger. IEEE Symposium Series on Computational Intelligence (SSCI), 2019, 2382–2387. https://doi.org/10.1109/ssci44817.2019.9002870

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Infoscience (Ecole Polytechnique Fédérale de Lausanne): sign in and open the full text from this page.

Who wrote this paper?

Li Tian, Nadia Magnenat‐Thalmann, Jianmin Zheng, Daniël Thalmann.

What is the DOI of this paper?

10.1109/ssci44817.2019.9002870, permanently at https://doi.org/10.1109/ssci44817.2019.9002870. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.