Journal article · 2016 · Open access

Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys

Bartosz Minorowicz, Giuseppe Leonetti, Frederik Stefański, Giulio Binetti, David Naso

Smart Materials and Structures, 25(7), 075005 · Published 24 May 2016 · DOI 10.1088/0964-1726/25/7/075005

Open PDFView at the publisherCite this paper

In brief

“Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys” is a 2016 journal article by Bartosz Minorowicz and 4 co-authors, published in Smart Materials and Structures. OpenAlex counts 29 citations as of 22 November 2026. It is open access: the full text is free to read at Smart Materials and Structures.

Citations
29
Most cited in
2020 (5)
Field-weighted impact
1.03
References
44
Authors
5

Abstract

This paper presents an actuator based on magnetic shape memory alloys (MSMAs) suitable for precise positioning in a wide range (up to 1 mm). The actuator is based on the spring returned operating mode and uses a Smalley wave spring to maintain the same operating parameters of a classical coil spring, while being characterized by a smaller dimension. The MSMA element inside the actuator provides a deformation when excited by an external magnetic field, but its behavior is characterized by an asymmetric and saturated hysteresis. Thus, two models are exploited in this work to represent such a non-linear behavior, i.e., the modified and generalized Prandtl–Ishlinskii models. These models are particularly suitable for control purposes due to the existence of their analytical inversion that can be easily exploited in real time control systems. To this aim, this paper investigates three closed-loop control strategies, namely a classical PID regulator, a PID regulator with direct hysteresis compensation, and a combined PID and feedforward compensation strategy. The effectiveness of both modelling and control strategies applied to the designed MSMA-based actuator is illustrated by means of experimental results.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Minorowicz, B., Leonetti, G., Stefański, F., Binetti, G., & Naso, D. (2016). Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys. Smart Materials and Structures, 25(7), 075005. https://doi.org/10.1088/0964-1726/25/7/075005

MLA 9

Minorowicz, Bartosz, et al. “Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys.” Smart Materials and Structures, vol. 25, no. 7, 2016, p. 075005. https://doi.org/10.1088/0964-1726/25/7/075005.

Chicago

Minorowicz, Bartosz, Giuseppe Leonetti, Frederik Stefański, Giulio Binetti, and David Naso. 2016. “Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys.” Smart Materials and Structures 25 (7): 075005. https://doi.org/10.1088/0964-1726/25/7/075005.

Harvard

Minorowicz, B. et al. (2016) ‘Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys’, Smart Materials and Structures, 25(7), p. 075005. doi:10.1088/0964-1726/25/7/075005.

IEEE

B. Minorowicz, G. Leonetti, F. Stefański, G. Binetti, and D. Naso, “Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys,” Smart Materials and Structures, vol. 25, no. 7, p. 075005, 2016, doi: 10.1088/0964-1726/25/7/075005.

BibTeX

@article{minorowicz2016design,
  title     = {{Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys}},
  author    = {Minorowicz, Bartosz and Leonetti, Giuseppe and Stefański, Frederik and Binetti, Giulio and Naso, David},
  journal   = {Smart Materials and Structures},
  year      = {2016},
  volume    = {25},
  number    = {7},
  pages     = {075005},
  doi       = {10.1088/0964-1726/25/7/075005},
  url       = {https://doi.org/10.1088/0964-1726/25/7/075005}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201733
201822
201911
202055
202144
202233
202355
202433
202633

Its field-weighted citation impact is 1.03: it has been cited 1.03 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Control and Systems Engineering › Piezoelectric Actuators and Control

  • magnetic shape memory alloys
  • Prandtl-Ishlinskii model
  • hysteresis compensation
  • feedforward compensation
  • PID control
  • actuator modeling
  • nonlinear hysteresis

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Minorowicz, B., Leonetti, G., Stefański, F., Binetti, G., & Naso, D. (2016). Design, modelling and control of a micro-positioning actuator based on magnetic shape memory alloys. Smart Materials and Structures, 25(7), 075005. https://doi.org/10.1088/0964-1726/25/7/075005

How many times has this paper been cited?

29 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Smart Materials and Structures: sign in and open the PDF from this page.

Who wrote this paper?

Bartosz Minorowicz, Giuseppe Leonetti, Frederik Stefański, Giulio Binetti, David Naso.

What is the DOI of this paper?

10.1088/0964-1726/25/7/075005, permanently at https://doi.org/10.1088/0964-1726/25/7/075005. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.