Journal article · 2026 · Open access

Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper

Shuman Xu, Yijin Xiong, Xiurui Qu, Zengzhi Zhang

Scientific Reports · Published 1 October 2026 · DOI 10.1038/s41598-026-72615-7

Open PDFView at the publisherCite this paper

In brief

“Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper” is a 2026 journal article by Shuman Xu and 3 co-authors, published in Scientific Reports. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Scientific Reports.

Citations
0
References
31
Authors
4

Abstract

Soft pneumatic grippers show immense promise in grasping fragile, irregular, and unknown objects; however, simultaneously achieving high payload capacity and grasping flexibility under low actuation pressure remains a critical challenge. In this paper, we propose a low-pressure dual-mode pneumatic soft gripper, which is constructed by rigidly coupling a cylindrical enveloping module and a three-finger soft pneumatic network (PneuNet) bending module. The cylindrical module achieves an active enveloping grasp for heavy loads through inward radial expansion, whereas the three-finger module flexibly accommodates objects of various shapes and sizes via bending deformation. To characterize the actuation behavior of the cylindrical module, its deforming architecture is modeled as a thin-walled curved chamber, and the deformation process is conceptualized into two sequential stages: inversion and bulging. By combining analytical formulations and finite element analysis (FEA), a two-stage inflation mechanics model is established, augmented by a semi-empirical correction to account for non-ideal boundary constraints and material softening effects. Furthermore, FEA is utilized to predict the bending deformation of the PneuNet fingers, exhibiting excellent agreement with experimental measurements. Experimental results demonstrate that under a low actuation pressure of merely 20 kPa, the dual-mode gripper can achieve an exceptional vertical payload of up to 6.5 kg when grasping a 36-mm-diameter sphere. Moreover, the two grasping modules can synergistically interact to manipulate and reorient a single complex target, or independently grasp two distinct objects simultaneously. Ultimately, the proposed low-pressure, dual-mode soft gripper demonstrates substantial potential for versatile, safe, and highly efficient robotic manipulation.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Xu, S., Xiong, Y., Qu, X., & Zhang, Z. (2026). Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper. Scientific Reports. https://doi.org/10.1038/s41598-026-72615-7

MLA 9

Xu, Shuman, et al. “Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper.” Scientific Reports, 2026. https://doi.org/10.1038/s41598-026-72615-7.

Chicago

Xu, Shuman, Yijin Xiong, Xiurui Qu, and Zengzhi Zhang. 2026. “Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper.” Scientific Reports. https://doi.org/10.1038/s41598-026-72615-7.

Harvard

Xu, S. et al. (2026) ‘Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper’, Scientific Reports. doi:10.1038/s41598-026-72615-7.

IEEE

S. Xu, Y. Xiong, X. Qu, and Z. Zhang, “Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper,” Scientific Reports, 2026, doi: 10.1038/s41598-026-72615-7.

BibTeX

@article{xu2026design,
  title     = {{Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper}},
  author    = {Xu, Shuman and Xiong, Yijin and Qu, Xiurui and Zhang, Zengzhi},
  journal   = {Scientific Reports},
  year      = {2026},
  doi       = {10.1038/s41598-026-72615-7},
  url       = {https://doi.org/10.1038/s41598-026-72615-7}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • bending deformation
  • payload capacity
  • robotic manipulation
  • soft robotics

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Xu, S., Xiong, Y., Qu, X., & Zhang, Z. (2026). Design, modeling, and characterization of a low-pressure dual-mode pneumatic soft actuator-gripper. Scientific Reports. https://doi.org/10.1038/s41598-026-72615-7

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Scientific Reports: sign in and open the PDF from this page.

Who wrote this paper?

Shuman Xu, Yijin Xiong, Xiurui Qu, Zengzhi Zhang.

What is the DOI of this paper?

10.1038/s41598-026-72615-7, permanently at https://doi.org/10.1038/s41598-026-72615-7. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.