Journal article · 2014 · Open access

Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges

Zhigang Wu, Yangmin Li

Advances in Mechanical Engineering, 6, 947584 · Published 1 January 2014 · DOI 10.1155/2014/947584

Open full textCite this paper

In brief

“Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges” is a 2014 journal article by Zhigang Wu and Yangmin Li, published in Advances in Mechanical Engineering. OpenAlex counts 17 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Advances in Mechanical Engineering.

Citations
17
Most cited in
2015 (3)
Field-weighted impact
2.30
References
20
Authors
2

Abstract

A new 2-DOF microgripper, which can perform the processing of the objects assembly and biological cells injection, is designed and modeled in this paper. The clamping action of the microgripper with the x direction is completed, however, when anything is clamped by the end effector, which can be completely driven by an actuator generated in y direction, at lastclamping and pushing motion are realized. The flexure hinge, which takes place of the conventional joint, is used as the translational and rotational hinges in the new structure. Otherwise, the whole microgripper is monolithic processing, which can efficiently overcome the disadvantages of the conventional hinge with friction, backlash, anderrors caused by the hinge assembly. Firstly, a kind of novel microgripper is designed in this paper, which can accomplish two-dimensional independent motions including a separate grip and single track push without interfering with each other. The bridge type amplifying structure with two-end output is adopted in the gripper to increase the motion range and the capacity of the microgripper. The piezoelectric actuator with fast response and high resolution is used as the drive element. Secondly, the geometrical and kinematical models are established and the formulas of the amplifying ratio, stiffness, maximum stress, and the natural frequency of this model are calculated, respectively. Finally, the FEM (finite element modeling) based on ANSYS software is built up to validate the formulas.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Wu, Z., & Li, Y. (2014). Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges. Advances in Mechanical Engineering, 6, 947584. https://doi.org/10.1155/2014/947584

MLA 9

Wu, Zhigang, and Yangmin Li. “Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges.” Advances in Mechanical Engineering, vol. 6, 2014, p. 947584. https://doi.org/10.1155/2014/947584.

Chicago

Wu, Zhigang and Yangmin Li. 2014. “Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges.” Advances in Mechanical Engineering 6: 947584. https://doi.org/10.1155/2014/947584.

Harvard

Wu, Z. and Li, Y. (2014) ‘Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges’, Advances in Mechanical Engineering, 6, p. 947584. doi:10.1155/2014/947584.

IEEE

Z. Wu and Y. Li, “Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges,” Advances in Mechanical Engineering, vol. 6, p. 947584, 2014, doi: 10.1155/2014/947584.

BibTeX

@article{wu2014design,
  title     = {{Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges}},
  author    = {Wu, Zhigang and Li, Yangmin},
  journal   = {Advances in Mechanical Engineering},
  year      = {2014},
  volume    = {6},
  pages     = {947584},
  doi       = {10.1155/2014/947584},
  url       = {https://doi.org/10.1155/2014/947584}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201422
201533
201611
201733
201922
202033
202411
202511
202611

Its field-weighted citation impact is 2.30: it has been cited 2.30 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Control and Systems Engineering › Piezoelectric Actuators and Control

  • microgripper
  • flexure hinges
  • piezoelectric actuators
  • kinematic modeling
  • stiffness analysis
  • natural frequencies
  • microassembly

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Wu, Z., & Li, Y. (2014). Design, Modeling, and Analysis of a Novel Microgripper Based on Flexure Hinges. Advances in Mechanical Engineering, 6, 947584. https://doi.org/10.1155/2014/947584

How many times has this paper been cited?

17 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advances in Mechanical Engineering: sign in and open the full text from this page.

Who wrote this paper?

Zhigang Wu, Yangmin Li.

What is the DOI of this paper?

10.1155/2014/947584, permanently at https://doi.org/10.1155/2014/947584. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.