Journal article · 2020 · Open access

Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects

Michele Gabrio Antonelli, Pierluigi Beomonte Zobel, Walter D’Ambrogio, Francesco Durante

Actuators, 9(4), 113 · Published 10 November 2020 · DOI 10.3390/act9040113

Open PDFView at the publisherCite this paper

In brief

“Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects” is a 2020 journal article by Michele Gabrio Antonelli and 3 co-authors, published in Actuators. OpenAlex counts 16 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Actuators.

Citations
16
Most cited in
2024 (7)
Field-weighted impact
0.46
References
38
Authors
4

Abstract

In the landscape of Industry 4.0, advanced robotics awaits a growing use of bioinspired adaptive and flexible robots. Collaborative robotics meets this demand. Due to human–robot coexistence and interaction, the safety, the first requirement to be satisfied, also depends on the end effectors. End effectors made of soft actuators satisfy this requirement. A novel pneumatic bending soft actuator with high compliance, low cost, high versatility and easy production is here proposed. Conceived to be used as a finger of a collaborative robot, it is made of a hyper-elastic inner tube wrapped in a gauze. The bending is controlled by cuts in the gauze: the length and the angular extension of them, the pressure value and the dimensions of the inner tube determine the bending amplitude and avoid axial elongation. A design methodology, oriented to kinematically mirror the shape of the object to be grasped, was defined. Firstly, it consists of the development of a non-linear parametric numerical model of a bioinspired finger; then, the construction of a prototype for the experimental validation of the numerical model was performed. Hence, a campaign of simulations led to the definition of a qualitatively predictive formula, the basis for the design methodology. The effectiveness of the latter was evaluated for a real case: an actuator for the grasping of a light bulb was designed and experimentally tested.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Antonelli, M. G., Zobel, P. B., D’Ambrogio, W., & Durante, F. (2020). Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects. Actuators, 9(4), 113. https://doi.org/10.3390/act9040113

MLA 9

Antonelli, Michele Gabrio, et al. “Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects.” Actuators, vol. 9, no. 4, 2020, p. 113. https://doi.org/10.3390/act9040113.

Chicago

Antonelli, Michele Gabrio, Pierluigi Beomonte Zobel, Walter D’Ambrogio, and Francesco Durante. 2020. “Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects.” Actuators 9 (4): 113. https://doi.org/10.3390/act9040113.

Harvard

Antonelli, M. G. et al. (2020) ‘Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects’, Actuators, 9(4), p. 113. doi:10.3390/act9040113.

IEEE

M. G. Antonelli, P. B. Zobel, W. D’Ambrogio, and F. Durante, “Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects,” Actuators, vol. 9, no. 4, p. 113, 2020, doi: 10.3390/act9040113.

BibTeX

@article{antonelli2020design,
  title     = {{Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects}},
  author    = {Antonelli, Michele Gabrio and Zobel, Pierluigi Beomonte and D’Ambrogio, Walter and Durante, Francesco},
  journal   = {Actuators},
  year      = {2020},
  volume    = {9},
  number    = {4},
  pages     = {113},
  doi       = {10.3390/act9040113},
  url       = {https://doi.org/10.3390/act9040113}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202111
202266
202477
202511
202611

Its field-weighted citation impact is 0.46: it has been cited 0.46 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft pneumatic actuators
  • bending actuators
  • soft robotics
  • collaborative robots
  • end effector
  • grasping
  • human-robot coexistence
  • design methodology

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Antonelli, M. G., Zobel, P. B., D’Ambrogio, W., & Durante, F. (2020). Design Methodology for a Novel Bending Pneumatic Soft Actuator for Kinematically Mirroring the Shape of Objects. Actuators, 9(4), 113. https://doi.org/10.3390/act9040113

How many times has this paper been cited?

16 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Actuators: sign in and open the PDF from this page.

Who wrote this paper?

Michele Gabrio Antonelli, Pierluigi Beomonte Zobel, Walter D’Ambrogio, Francesco Durante.

What is the DOI of this paper?

10.3390/act9040113, permanently at https://doi.org/10.3390/act9040113. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.