Journal article · 2026 · Open access

Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper

Hoang Bui Huy

Revista de Ciencias Tecnológicas, 9(3), 1–14 · Published 8 August 2026 · DOI 10.37636/recit.v9n3e502

Open PDFView at the publisherCite this paper

In brief

“Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper” is a 2026 journal article by Hoang Bui Huy, published in Revista de Ciencias Tecnológicas. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Revista de Ciencias Tecnológicas.

Citations
0
References
30
Authors
1

Abstract

This study presents the design, finite element analysis, fabrication, and experimental validation of a low-cost three-finger soft gripper based on the Fin Ray effect. The proposed system integrates TPU 95A compliant fingers, a PLA supporting structure, and an Arduino-controlled stepper-motor actuation mechanism. Several Fin Ray rib configurations were systematically evaluated using analytical modelling, finite element simulations, and experimental testing under a representative 5 N loading condition. The results showed that the contact region located approximately between one-half and two-thirds of the finger length produced the most effective deformation behavior. Among the investigated configurations, the curved-rib design achieved the largest displacement of approximately 14.45 mm while maintaining stable grasping performance. Good agreement was obtained between numerical predictions and experimental measurements, with deformation errors generally below 10% and a maximum error of 11.22%. The study establishes a reproducible CAD–FEA–3D printing experimental validation workflow and demonstrates a low-cost Fin Ray soft gripper platform that can support future research, rapid prototyping, and engineering education.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Huy, H. B. (2026). Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper. Revista de Ciencias Tecnológicas, 9(3), 1–14. https://doi.org/10.37636/recit.v9n3e502

MLA 9

Huy, Hoang Bui. “Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper.” Revista de Ciencias Tecnológicas, vol. 9, no. 3, 2026, pp. 1–14. https://doi.org/10.37636/recit.v9n3e502.

Chicago

Huy, Hoang Bui. 2026. “Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper.” Revista de Ciencias Tecnológicas 9 (3): 1–14. https://doi.org/10.37636/recit.v9n3e502.

Harvard

Huy, H. B. (2026) ‘Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper’, Revista de Ciencias Tecnológicas, 9(3), pp. 1–14. doi:10.37636/recit.v9n3e502.

IEEE

H. B. Huy, “Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper,” Revista de Ciencias Tecnológicas, vol. 9, no. 3, pp. 1–14, 2026, doi: 10.37636/recit.v9n3e502.

BibTeX

@article{huy2026design,
  title     = {{Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper}},
  author    = {Huy, Hoang Bui},
  journal   = {Revista de Ciencias Tecnológicas},
  year      = {2026},
  volume    = {9},
  number    = {3},
  pages     = {1--14},
  doi       = {10.37636/recit.v9n3e502},
  url       = {https://doi.org/10.37636/recit.v9n3e502}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft gripper
  • three-finger gripper
  • compliant fingers
  • stepper motor actuation
  • Arduino control
  • rib configuration
  • grasping performance
  • low-cost fabrication

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Huy, H. B. (2026). Design, fabrication, and experimental evaluation of a three-finger Fin Ray soft gripper. Revista de Ciencias Tecnológicas, 9(3), 1–14. https://doi.org/10.37636/recit.v9n3e502

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Revista de Ciencias Tecnológicas: sign in and open the PDF from this page.

Who wrote this paper?

Hoang Bui Huy.

What is the DOI of this paper?

10.37636/recit.v9n3e502, permanently at https://doi.org/10.37636/recit.v9n3e502. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.