Journal article · 2019 · Open access

Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics

Benjamin Shih, Caleb Christianson, Kyle Gillespie, Sebastian Lee, Jason Mayeda, Zhaoyuan Huo, Michael Thomas Tolley

Frontiers in Robotics and AI, 6, 30 · Published 30 April 2019 · DOI 10.3389/frobt.2019.00030

Open PDFView at the publisherCite this paper

In brief

“Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics” is a 2019 journal article by Benjamin Shih and 6 co-authors, published in Frontiers in Robotics and AI. OpenAlex counts 122 citations as of 22 November 2026, which puts it in the top 1% of works published in 2019 by citations. It is open access under a CC BY licence: the full text is free to read at Frontiers in Robotics and AI.

Citations
122
Most cited in
2022 (28)
Field-weighted impact
4.28
References
56
Authors
7

Abstract

Sensor design for soft robots is a challenging problem because of the wide range of design parameters (e.g., geometry, material, actuation type, etc.) critical to their function. While conventional rigid sensors work effectively for soft robotics in specific situations, sensors that are directly integrated into the bodies of soft robots could help improve both their exteroceptive and interoceptive capabilities. To address this challenge, we designed sensors that can be co-fabricated with soft robot bodies using commercial 3D printers, without additional modification. We describe an approach to the design and fabrication of compliant, resistive soft sensors using a Connex3 Objet350 multimaterial printer and investigated an analytical comparison to sensors of similar geometries. The sensors consist of layers of commercial photopolymers with varying conductivities. We characterized the conductivity of TangoPlus, TangoBlackPlus, VeroClear, and Support705 materials under various conditions and demonstrate applications in which we can take advantage of these embedded sensors.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Shih, B., Christianson, C., Gillespie, K., Lee, S., Mayeda, J., Huo, Z., & Tolley, M. T. (2019). Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics. Frontiers in Robotics and AI, 6, 30. https://doi.org/10.3389/frobt.2019.00030

MLA 9

Shih, Benjamin, et al. “Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics.” Frontiers in Robotics and AI, vol. 6, 2019, p. 30. https://doi.org/10.3389/frobt.2019.00030.

Chicago

Shih, Benjamin, Caleb Christianson, Kyle Gillespie, Sebastian Lee, Jason Mayeda, Zhaoyuan Huo, and Michael Thomas Tolley. 2019. “Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics.” Frontiers in Robotics and AI 6: 30. https://doi.org/10.3389/frobt.2019.00030.

Harvard

Shih, B. et al. (2019) ‘Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics’, Frontiers in Robotics and AI, 6, p. 30. doi:10.3389/frobt.2019.00030.

IEEE

B. Shih et al., “Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics,” Frontiers in Robotics and AI, vol. 6, p. 30, 2019, doi: 10.3389/frobt.2019.00030.

BibTeX

@article{shih2019design,
  title     = {{Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics}},
  author    = {Shih, Benjamin and Christianson, Caleb and Gillespie, Kyle and Lee, Sebastian and Mayeda, Jason and Huo, Zhaoyuan and Tolley, Michael Thomas},
  journal   = {Frontiers in Robotics and AI},
  year      = {2019},
  volume    = {6},
  pages     = {30},
  doi       = {10.3389/frobt.2019.00030},
  url       = {https://doi.org/10.3389/frobt.2019.00030}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
20201414
20211717
20222828
20231616
20241616
20251818
20261313

Its field-weighted citation impact is 4.28: it has been cited 4.28 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft robotics
  • 3D printing
  • multi-material printing
  • embedded sensors
  • sensor design
  • interoception
  • exteroception
  • conductive filaments

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Shih, B., Christianson, C., Gillespie, K., Lee, S., Mayeda, J., Huo, Z., & Tolley, M. T. (2019). Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics. Frontiers in Robotics and AI, 6, 30. https://doi.org/10.3389/frobt.2019.00030

How many times has this paper been cited?

122 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Frontiers in Robotics and AI: sign in and open the PDF from this page.

Who wrote this paper?

Benjamin Shih, Caleb Christianson, Kyle Gillespie, Sebastian Lee, Jason Mayeda, Zhaoyuan Huo, Michael Thomas Tolley.

What is the DOI of this paper?

10.3389/frobt.2019.00030, permanently at https://doi.org/10.3389/frobt.2019.00030. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.