Journal article · 2013 · Open access
Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions
Applied Mechanics and Materials, 401-403, 762–766 · Published 3 September 2013 · DOI 10.4028/www.scientific.net/amm.401-403.762
In brief
“Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions” is a 2013 journal article by Ming Der Jean and 4 co-authors, published in Applied Mechanics and Materials. OpenAlex counts 3 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.
- Citations
- 3
- Most cited in
- 2022 (1)
- References
- 11
- Authors
- 5
Abstract
Analysis of mechanical properties of diamond-like carbon (DLC) films based on experimental designs was reported to optimize characterize by a magnetron sputtering. An orthogonal array experiment was introduced and the effects of deposited parameters on the films were systematically explored. The films were analyzed by scanning electron microscopy (SEM). Friction and wear tests were carried out using a pin-on-disk tribometer. In this study, the two stages such as adhesive and abrasive wears for tribological properties are clearly visible among L18 tests, where at the higher wear volume losses exist an abrasive wear while the less wear volume losses appear an adhesive wear. A slightly worn surface with a glassy carbon phase appeared and a lower wear volume loss became visible in the DLC films. Through the optimal design, the experimental results demonstrate the tribological properties on DLC multilayer films are increased by a magnetron sputtering, thereby justifying the reliability and feasibility of the approach.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Der Jean, M., Du Liu, C., Wang, S. F., Li, C. H., & Kao, K. H. (2013). Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions. Applied Mechanics and Materials, 401-403, 762–766. https://doi.org/10.4028/www.scientific.net/amm.401-403.762
MLA 9
Der Jean, Ming, et al. “Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions.” Applied Mechanics and Materials, vol. 401-403, 2013, pp. 762–766. https://doi.org/10.4028/www.scientific.net/amm.401-403.762.
Chicago
Der Jean, Ming, Chyuan Du Liu, Shin Fuh Wang, Chun Han Li, and Kuang Hvi Kao. 2013. “Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions.” Applied Mechanics and Materials 401-403: 762–766. https://doi.org/10.4028/www.scientific.net/amm.401-403.762.
Harvard
Der Jean, M. et al. (2013) ‘Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions’, Applied Mechanics and Materials, 401-403, pp. 762–766. doi:10.4028/www.scientific.net/amm.401-403.762.
IEEE
M. Der Jean, C. Du Liu, S. F. Wang, C. H. Li, and K. H. Kao, “Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions,” Applied Mechanics and Materials, vol. 401-403, pp. 762–766, 2013, doi: 10.4028/www.scientific.net/amm.401-403.762.
BibTeX
@article{derjean2013design,
title = {{Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions}},
author = {Der Jean, Ming and Du Liu, Chyuan and Wang, Shin Fuh and Li, Chun Han and Kao, Kuang Hvi},
journal = {Applied Mechanics and Materials},
year = {2013},
volume = {401-403},
pages = {762--766},
doi = {10.4028/www.scientific.net/amm.401-403.762},
url = {https://doi.org/10.4028/www.scientific.net/amm.401-403.762}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 1 | |
| 2024 | 1 | |
| 2025 | 1 |
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon films
- magnetron sputtering
- orthogonal experimental design
- process parameter optimization
- tribological properties
- adhesive wear
- abrasive wear
- wear volume loss
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Der Jean, M., Du Liu, C., Wang, S. F., Li, C. H., & Kao, K. H. (2013). Design and Optimization of Surface Properties for Diamond-Like Carbon Films by Sputtering Depositions. Applied Mechanics and Materials, 401-403, 762–766. https://doi.org/10.4028/www.scientific.net/amm.401-403.762
How many times has this paper been cited?
3 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Applied Mechanics and Materials.
Who wrote this paper?
Ming Der Jean, Chyuan Du Liu, Shin Fuh Wang, Chun Han Li, Kuang Hvi Kao.
What is the DOI of this paper?
10.4028/www.scientific.net/amm.401-403.762. The permanent link is https://doi.org/10.4028/www.scientific.net/amm.401-403.762.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.