Journal article · 2020 · Open access

Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions

Amir Pagoli, Frédéric Chapelle, Juan Antonio Corrales Ramón, Youcef Mezouar, Yuri N. Lapusta

IEEE Robotics & Automation Magazine, 27(4), 56–64 · Published 8 October 2020 · DOI 10.1109/mra.2020.3024283

Open full textView at the publisherCite this paper

In brief

“Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions” is a 2020 journal article by Amir Pagoli and 4 co-authors, published in IEEE Robotics & Automation Magazine. OpenAlex counts 20 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at HAL.

Citations
20
Most cited in
2022 (6)
Field-weighted impact
0.80
References
22
Authors
5

Abstract

In this article, we introduce a new soft finger with a pneumatic-actuated movable joint that is optimized and characterized in terms of the degrees of freedom (DoF), workspace, and fingertip force. The finger consists of one soft link as the body and the bending pneumatic joint as the actuator. Due to the additional translation and rotation movement capabilities of the joint, carried out by two stepper motors, the finger can bend in any direction while having different lengths, thanks to a configurable bending point. This results in more dexterity for the finger when dealing with a target inside its 3D workspace by increasing the number of configurations it can use to reach the target and exert force. The finite element method (FEM) and the Nondominated Sorting Genetic Algorithm II (NSGA-II) algorithm are applied to optimize the joint geometry and so maximize the bending angle and minimize the joint dimensions. Furthermore, the variations of each design parameter and consequent effects on the optimization objectives are analyzed. The optimal geometrical parameters are used to fabricate a prototype with silicone rubber. Tests on the bending angle and tip force variability are conducted on the prototype to validate the numerical modeling. The experimental results show that the finger exerts force up to 650 mN with a response time of fewer than 3 s. The stiffness of the finger can be changed by applying pneumatic pressure in the hollow space inside the link. This consequently varies the amount of applied force at the tipping point of the finger up to two times.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Pagoli, A., Chapelle, F., Ramón, J. A. C., Mezouar, Y., & Lapusta, Y. N. (2020). Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions. IEEE Robotics & Automation Magazine, 27(4), 56–64. https://doi.org/10.1109/mra.2020.3024283

MLA 9

Pagoli, Amir, et al. “Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions.” IEEE Robotics & Automation Magazine, vol. 27, no. 4, 2020, pp. 56–64. https://doi.org/10.1109/mra.2020.3024283.

Chicago

Pagoli, Amir, Frédéric Chapelle, Juan Antonio Corrales Ramón, Youcef Mezouar, and Yuri N. Lapusta. 2020. “Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions.” IEEE Robotics & Automation Magazine 27 (4): 56–64. https://doi.org/10.1109/mra.2020.3024283.

Harvard

Pagoli, A. et al. (2020) ‘Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions’, IEEE Robotics & Automation Magazine, 27(4), pp. 56–64. doi:10.1109/mra.2020.3024283.

IEEE

A. Pagoli, F. Chapelle, J. A. C. Ramón, Y. Mezouar, and Y. N. Lapusta, “Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions,” IEEE Robotics & Automation Magazine, vol. 27, no. 4, pp. 56–64, 2020, doi: 10.1109/mra.2020.3024283.

BibTeX

@article{pagoli2020design,
  title     = {{Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions}},
  author    = {Pagoli, Amir and Chapelle, Frédéric and Ramón, Juan Antonio Corrales and Mezouar, Youcef and Lapusta, Yuri N.},
  journal   = {IEEE Robotics \& Automation Magazine},
  year      = {2020},
  volume    = {27},
  number    = {4},
  pages     = {56--64},
  doi       = {10.1109/mra.2020.3024283},
  url       = {https://doi.org/10.1109/mra.2020.3024283}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202144
202266
202311
202433
202533
202622

Its field-weighted citation impact is 0.80: it has been cited 0.80 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft fingers
  • pneumatic actuators
  • dexterous manipulation
  • degrees of freedom
  • workspace analysis
  • fingertip force
  • joint geometry optimization
  • NSGA-II

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Pagoli, A., Chapelle, F., Ramón, J. A. C., Mezouar, Y., & Lapusta, Y. N. (2020). Design and Optimization of a Dextrous Robotic Finger: Incorporating a Sliding, Rotating, and Soft-Bending Mechanism While Maximizing Dexterity and Minimizing Dimensions. IEEE Robotics & Automation Magazine, 27(4), 56–64. https://doi.org/10.1109/mra.2020.3024283

How many times has this paper been cited?

20 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at HAL: sign in and open the full text from this page.

Who wrote this paper?

Amir Pagoli, Frédéric Chapelle, Juan Antonio Corrales Ramón, Youcef Mezouar, Yuri N. Lapusta.

What is the DOI of this paper?

10.1109/mra.2020.3024283, permanently at https://doi.org/10.1109/mra.2020.3024283. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.