Journal article · 2022 · Open access

Design and Manufacture of a Flexible Pneumatic Soft Gripper

Jing Lei, Zhenghao Ge, Pengju Fan, Wang Zou, Tao Jiang, Liang Dong

Applied Sciences, 12(13), 6306 · Published 21 June 2022 · DOI 10.3390/app12136306

Open PDFView at the publisherCite this paper

In brief

“Design and Manufacture of a Flexible Pneumatic Soft Gripper” is a 2022 journal article by Jing Lei and 5 co-authors, published in Applied Sciences. OpenAlex counts 39 citations as of 22 November 2026, which puts it in the top 7% of works published in 2022 by citations. It is open access under a CC BY licence: the full text is free to read at Applied Sciences.

Citations
39
Most cited in
2026 (15)
Field-weighted impact
1.48
References
24
Authors
6

Abstract

The soft robot has many degrees of freedom, strong environmental adaptability, and good human–computer interaction ability. As the end-effector of the soft robot, the soft gripper can grasp objects of different shapes without destructivity. Based on the theoretical analysis of the soft robot, the kinematics model of the flexible gripper and the theoretical model of the bending deformation of the air cavity were established. Accordingly, the relationship between the bending angle of the soft gripper and the air pressure was determined. Through the application of finite element software, the bending degree of the pneumatic network multi-cavity soft gripper was simulated, and the influence of structural parameters of soft actuator on bending deformation was determined. In addition, the 3D technology conducts the printing of soft gripper fixtures and molds, the injection molds the actuator, and the human–computer interaction interface controls the movement of the gripper. This paper proposes the control and monitoring of the soft gripper are realized through the electrical control module, the air circuit control module, and the sensor group module, and the size of the airflow velocity can be controlled by PWM DC speed regulation. The adaptability of the soft gripper in grasping objects was verified. The results shows that the software gripper possesses good flexibility and can better grasp objects of different shapes.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lei, J., Ge, Z., Fan, P., Zou, W., Jiang, T., & Dong, L. (2022). Design and Manufacture of a Flexible Pneumatic Soft Gripper. Applied Sciences, 12(13), 6306. https://doi.org/10.3390/app12136306

MLA 9

Lei, Jing, et al. “Design and Manufacture of a Flexible Pneumatic Soft Gripper.” Applied Sciences, vol. 12, no. 13, 2022, p. 6306. https://doi.org/10.3390/app12136306.

Chicago

Lei, Jing, Zhenghao Ge, Pengju Fan, Wang Zou, Tao Jiang, and Liang Dong. 2022. “Design and Manufacture of a Flexible Pneumatic Soft Gripper.” Applied Sciences 12 (13): 6306. https://doi.org/10.3390/app12136306.

Harvard

Lei, J. et al. (2022) ‘Design and Manufacture of a Flexible Pneumatic Soft Gripper’, Applied Sciences, 12(13), p. 6306. doi:10.3390/app12136306.

IEEE

J. Lei, Z. Ge, P. Fan, W. Zou, T. Jiang, and L. Dong, “Design and Manufacture of a Flexible Pneumatic Soft Gripper,” Applied Sciences, vol. 12, no. 13, p. 6306, 2022, doi: 10.3390/app12136306.

BibTeX

@article{lei2022design,
  title     = {{Design and Manufacture of a Flexible Pneumatic Soft Gripper}},
  author    = {Lei, Jing and Ge, Zhenghao and Fan, Pengju and Zou, Wang and Jiang, Tao and Dong, Liang},
  journal   = {Applied Sciences},
  year      = {2022},
  volume    = {12},
  number    = {13},
  pages     = {6306},
  doi       = {10.3390/app12136306},
  url       = {https://doi.org/10.3390/app12136306}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202333
202477
20251414
20261515

Its field-weighted citation impact is 1.48: it has been cited 1.48 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft gripper
  • soft robotics
  • pneumatic actuators
  • bending deformation
  • atmospheric pressure
  • 3D printing of molds
  • injection molding
  • PWM speed control

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Lei, J., Ge, Z., Fan, P., Zou, W., Jiang, T., & Dong, L. (2022). Design and Manufacture of a Flexible Pneumatic Soft Gripper. Applied Sciences, 12(13), 6306. https://doi.org/10.3390/app12136306

How many times has this paper been cited?

39 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Applied Sciences: sign in and open the PDF from this page.

Who wrote this paper?

Jing Lei, Zhenghao Ge, Pengju Fan, Wang Zou, Tao Jiang, Liang Dong.

What is the DOI of this paper?

10.3390/app12136306, permanently at https://doi.org/10.3390/app12136306. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.