Conference paper · 2025 · Open access

Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion

Ajmal Khan, Wasim Ahmad, Salman Hussain

International Conference on Advances in Mechanical Engineering (ICAME), 111(1), 8 · Published 16 October 2025 · DOI 10.3390/engproc2025111008

Open PDFView at the publisherCite this paper

In brief

“Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion” is a 2025 conference paper by Ajmal Khan and 2 co-authors, published in International Conference on Advances in Mechanical Engineering (ICAME). OpenAlex counts 2 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at International Conference on Advances in Mechanical Engineering (ICAME).

Citations
2
Most cited in
2025 (1)
Field-weighted impact
3.72
References
12
Authors
3

Abstract

This research paper presents the design and implementation of a wall-climbing robot for safety-critical inspection systems. The robot incorporates wheels embedded with neodymium magnets and a rocker-bogie mechanism to navigate vertical and inverted surfaces. The key novelty of this work lies in the use of a simplified, sensorless rocker-bogie mechanism that enables smooth inner and outer transitions without depending on complex control systems. This study addresses the following research questions: (1) How can a wall-climbing robot achieve stable transitions using a rocker-bogie mechanism? (2) What is the maximum payload capacity of the robot without compromising mobility and stability? (3) How will the robot behave during obstacle climbing? Weighing 2.08 Kg, the robot can easily carry a payload of 1.56 Kg, and can climb obstacles of up to 20 mm. The robot system is controlled wirelessly via a Bluetooth module. During experimental testing, the robot performed different types of transitions with stability and reliable control. Future developments could include hybrid adhesion systems for unstructured situations and AI-assisted navigation.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Khan, A., Ahmad, W., & Hussain, S. (2025). Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion. International Conference on Advances in Mechanical Engineering (ICAME), 111(1), 8. https://doi.org/10.3390/engproc2025111008

MLA 9

Khan, Ajmal, et al. “Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion.” International Conference on Advances in Mechanical Engineering (ICAME), vol. 111, no. 1, 2025, p. 8. https://doi.org/10.3390/engproc2025111008.

Chicago

Khan, Ajmal, Wasim Ahmad, and Salman Hussain. 2025. “Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion.” International Conference on Advances in Mechanical Engineering (ICAME) 111 (1): 8. https://doi.org/10.3390/engproc2025111008.

Harvard

Khan, A., Ahmad, W. and Hussain, S. (2025) ‘Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion’, International Conference on Advances in Mechanical Engineering (ICAME), 111(1), p. 8. doi:10.3390/engproc2025111008.

IEEE

A. Khan, W. Ahmad, and S. Hussain, “Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion,” International Conference on Advances in Mechanical Engineering (ICAME), vol. 111, no. 1, p. 8, 2025, doi: 10.3390/engproc2025111008.

BibTeX

@inproceedings{khan2025design,
  title     = {{Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion}},
  author    = {Khan, Ajmal and Ahmad, Wasim and Hussain, Salman},
  booktitle = {International Conference on Advances in Mechanical Engineering (ICAME)},
  year      = {2025},
  volume    = {111},
  number    = {1},
  pages     = {8},
  doi       = {10.3390/engproc2025111008},
  url       = {https://doi.org/10.3390/engproc2025111008}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Power Line Inspection Robots

  • wall-climbing robot
  • magnetic adhesion
  • Nd-Fe-B permanent magnets
  • rocker-bogie mechanism
  • payload capacity
  • obstacle climbing
  • Bluetooth wireless control

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Khan, A., Ahmad, W., & Hussain, S. (2025). Design and Fabrication of Wall-Climbing Robot Using Magnetic Adhesion. International Conference on Advances in Mechanical Engineering (ICAME), 111(1), 8. https://doi.org/10.3390/engproc2025111008

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at International Conference on Advances in Mechanical Engineering (ICAME): sign in and open the PDF from this page.

Who wrote this paper?

Ajmal Khan, Wasim Ahmad, Salman Hussain.

What is the DOI of this paper?

10.3390/engproc2025111008, permanently at https://doi.org/10.3390/engproc2025111008. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.