Conference paper · 2011
Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force
Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 1445–1448 · Published 1 October 2011 · DOI 10.1109/icsens.2011.6127276
In brief
“Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force” is a 2011 conference paper by Jay Jamshid Khazaai and 3 co-authors, published in Proceedings of IEEE Sensors/Proceedings of IEEE Sensors .... OpenAlex counts 17 citations as of 22 November 2026. The publisher's version is not open access, and OpenAlex records no free legal copy.
- Citations
- 17
- Most cited in
- 2016 (4)
- Field-weighted impact
- 1.14
- References
- 7
- Authors
- 4
Abstract
This paper reports on the design, fabrication, and characterization of a distinctive MEMS gripper electro-thermally driven jointly by a new metallic V-shape actuator (VSA), and a set of modified Guckel U-shape actuators (mUSA). The modification of the angle between the hot and cold arms in the mUSA facilitates desired unidirectional in-plane displacement and thus increases… Read the full abstract at the publisher.
Excerpt. This paper is not open access.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Khazaai, J. J., Qu, H., Shillor, M., & Smith, L. M. (2011). Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force. Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 1445–1448. https://doi.org/10.1109/icsens.2011.6127276
MLA 9
Khazaai, Jay Jamshid, et al. “Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force.” Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 2011, pp. 1445–1448. https://doi.org/10.1109/icsens.2011.6127276.
Chicago
Khazaai, Jay Jamshid, Hongwei Qu, Meir Shillor, and Lorenzo M. Smith. 2011. “Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force.” Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...: 1445–1448. https://doi.org/10.1109/icsens.2011.6127276.
Harvard
Khazaai, J. J. et al. (2011) ‘Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force’, Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., pp. 1445–1448. doi:10.1109/icsens.2011.6127276.
IEEE
J. J. Khazaai, H. Qu, M. Shillor, and L. M. Smith, “Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force,” Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., pp. 1445–1448, 2011, doi: 10.1109/icsens.2011.6127276.
BibTeX
@inproceedings{khazaai2011design,
title = {{Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force}},
author = {Khazaai, Jay Jamshid and Qu, Hongwei and Shillor, Meir and Smith, Lorenzo M.},
booktitle = {Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...},
year = {2011},
pages = {1445--1448},
doi = {10.1109/icsens.2011.6127276},
url = {https://doi.org/10.1109/icsens.2011.6127276}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 2 | |
| 2015 | 2 | |
| 2016 | 4 | |
| 2017 | 2 | |
| 2018 | 1 | |
| 2019 | 1 | |
| 2021 | 1 | |
| 2023 | 1 | |
| 2025 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 1.14: it has been cited 1.14 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
- electrothermal actuation
- holding force
- electroplated nickel
- low power consumption
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Khazaai, J. J., Qu, H., Shillor, M., & Smith, L. M. (2011). Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force. Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 1445–1448. https://doi.org/10.1109/icsens.2011.6127276
How many times has this paper been cited?
17 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
OpenAlex records no free legal copy. Check your library's access, the authors' pages or a repository, or ask the corresponding author for a copy.
Who wrote this paper?
Jay Jamshid Khazaai, Hongwei Qu, Meir Shillor, Lorenzo M. Smith.
What is the DOI of this paper?
10.1109/icsens.2011.6127276, permanently at https://doi.org/10.1109/icsens.2011.6127276. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.