Journal article · 2026 · Open access

Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing

Zhuo Meng

Evolutions in Mechanical Engineering, 6(4) · Published 4 February 2026 · DOI 10.31031/eme.2026.06.000641

Open PDFView at the publisherCite this paper

In brief

“Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing” is a 2026 journal article by Zhuo Meng, published in Evolutions in Mechanical Engineering. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Evolutions in Mechanical Engineering.

Citations
0
References
9
Authors
1

Abstract

Soft robotic grippers offer significant advantages over their rigid counterparts in handling fragile, irregularly shaped objects.However, their widespread adoption is often limited by complex, multi-part fabrication processes and the difficulty of integrating sensing directly into the soft structure.This paper presents the design, fabrication and characterization of a novel, fully monolithic and sensorized soft robotic gripper fabricated in a single print job using Multi-Material PolyJet Additive Manufacturing.The gripper features four pneumatically actuated fingers, each with a bio-inspired, multi-chambered PneuNet (Pneumatic Network) structure.A rigid internal skeleton, printed from a stiff photopolymer, is encapsulated within a soft, elastomeric matrix to constrain deformation and enhance grip force.Crucially, fluidic capacitive sensors are co-fabricated within the soft material of each fingertip to enable real-time contact and pressure sensing.The monolithic fabrication eliminates assembly requirements and ensures robust interfacial bonding.Experimental results demonstrate the gripper's ability to securely grasp a variety of objects with different weights (up to 0.5kg), sizes and fragilities.The integrated sensors successfully detected contact events and provided a proportional response to applied pressure, validating the proposed design and manufacturing approach for creating complex, multi-functional soft robotic systems.soft robotic gripper fabricated in a single print cycle.The monolithic design integrates sensing and structure, resulting in a 28% higher payload-to-weight ratio and a 37% improvement in durability over conventional assembled grippers.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Meng, Z. (2026). Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing. Evolutions in Mechanical Engineering, 6(4). https://doi.org/10.31031/eme.2026.06.000641

MLA 9

Meng, Zhuo. “Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing.” Evolutions in Mechanical Engineering, vol. 6, no. 4, 2026. https://doi.org/10.31031/eme.2026.06.000641.

Chicago

Meng, Zhuo. 2026. “Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing.” Evolutions in Mechanical Engineering 6 (4). https://doi.org/10.31031/eme.2026.06.000641.

Harvard

Meng, Z. (2026) ‘Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing’, Evolutions in Mechanical Engineering, 6(4). doi:10.31031/eme.2026.06.000641.

IEEE

Z. Meng, “Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing,” Evolutions in Mechanical Engineering, vol. 6, no. 4, 2026, doi: 10.31031/eme.2026.06.000641.

BibTeX

@article{meng2026design,
  title     = {{Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing}},
  author    = {Meng, Zhuo},
  journal   = {Evolutions in Mechanical Engineering},
  year      = {2026},
  volume    = {6},
  number    = {4},
  doi       = {10.31031/eme.2026.06.000641},
  url       = {https://doi.org/10.31031/eme.2026.06.000641}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft gripper
  • monolithic fabrication
  • pneumatic networks
  • biomimetic design
  • pressure sensing
  • tactile sensing
  • elastomer matrix
  • fragile object grasping

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Meng, Z. (2026). Design and Fabrication of a Monolithic, Sensorized Soft Robotic Gripper using Multi-Material PolyJet Additive Manufacturing. Evolutions in Mechanical Engineering, 6(4). https://doi.org/10.31031/eme.2026.06.000641

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Evolutions in Mechanical Engineering: sign in and open the PDF from this page.

Who wrote this paper?

Zhuo Meng.

What is the DOI of this paper?

10.31031/eme.2026.06.000641, permanently at https://doi.org/10.31031/eme.2026.06.000641. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.