Journal article · 2026 · Open access
Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation
Actuators, 15(9), 491 · Published 18 September 2026 · DOI 10.3390/act15090491
In brief
“Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation” is a 2026 journal article by Siddhartha Aryal and 3 co-authors, published in Actuators. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Actuators.
- Citations
- 0
- References
- 24
- Authors
- 4
Abstract
Variable-stiffness tactile interfaces are of interest for applications including medical simulation, rehabilitation, and human–machine interaction, where controllable mechanical resistance is required during physical contact. Granular jamming provides a mechanically simple approach for modulating stiffness by transitioning a particle-filled compliant structure from a deformable to a load-bearing state through vacuum-induced confinement. This study presents the design, fabrication, and quasi-static mechanical characterization of a 25 mm diameter vacuum-controlled granular-jamming tactile nodule. The device consisted of a compliant membrane chamber containing 8 g of 0.6–0.8 mm plastic microbeads and was actuated using a syringe-based vacuum circuit. Compression testing was performed using a finger-like rubber indenter across eleven vacuum levels from 0 to −68.9 kPa. Global and depth-dependent local stiffness were calculated from repeated force-displacement measurements. Vacuum actuation increased effective global stiffness from 1.168 N/mm at atmospheric pressure to a maximum of 9.808 N/mm at −62.1 kPa, representing an approximately 8.4-fold increase. Local stiffness exhibited nonlinear pressure- and depth-dependent behavior, reaching 15.06 N/mm at 2.00 mm indentation and −68.9 kPa. These results provide quantitative design guidance for future granular-jamming tactile interfaces requiring controllable compliance and realistic mechanical feedback.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Aryal, S., Pradhan, P., Khadka, M., & Song, S. (2026). Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation. Actuators, 15(9), 491. https://doi.org/10.3390/act15090491
MLA 9
Aryal, Siddhartha, et al. “Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation.” Actuators, vol. 15, no. 9, 2026, p. 491. https://doi.org/10.3390/act15090491.
Chicago
Aryal, Siddhartha, Pranish Pradhan, Mahesh Khadka, and Sang‐Eun Song. 2026. “Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation.” Actuators 15 (9): 491. https://doi.org/10.3390/act15090491.
Harvard
Aryal, S. et al. (2026) ‘Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation’, Actuators, 15(9), p. 491. doi:10.3390/act15090491.
IEEE
S. Aryal, P. Pradhan, M. Khadka, and S. Song, “Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation,” Actuators, vol. 15, no. 9, p. 491, 2026, doi: 10.3390/act15090491.
BibTeX
@article{aryal2026design,
title = {{Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation}},
author = {Aryal, Siddhartha and Pradhan, Pranish and Khadka, Mahesh and Song, Sang‐Eun},
journal = {Actuators},
year = {2026},
volume = {15},
number = {9},
pages = {491},
doi = {10.3390/act15090491},
url = {https://doi.org/10.3390/act15090491}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- granular jamming
- vacuum actuation
- variable stiffness
- touch interfaces
- stiffness modulation
- microbeads
- mechanical characterization
- haptic feedback
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Aryal, S., Pradhan, P., Khadka, M., & Song, S. (2026). Design and Experimental Characterization of a Vacuum-Actuated Granular-Jamming Actuator for Stiffness Modulation. Actuators, 15(9), 491. https://doi.org/10.3390/act15090491
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Actuators: sign in and open the full text from this page.
Who wrote this paper?
Siddhartha Aryal, Pranish Pradhan, Mahesh Khadka, Sang‐Eun Song.
What is the DOI of this paper?
10.3390/act15090491, permanently at https://doi.org/10.3390/act15090491. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.