Journal article · 2025 · Open access

Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting

Kai Blanco, Eduardo Navas, Daniel Rodríguez-Nieto, Luis Emmi, Roemí Fernández

Agronomy, 15(4), 804 · Published 24 March 2025 · DOI 10.3390/agronomy15040804

Open PDFView at the publisherCite this paper

In brief

“Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting” is a 2025 journal article by Kai Blanco and 4 co-authors, published in Agronomy. OpenAlex counts 7 citations as of 22 November 2026, which puts it in the top 5% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Agronomy.

Citations
7
Most cited in
2026 (4)
Field-weighted impact
1.23
References
16
Authors
5

Abstract

Robotic harvesters and grippers have been widely developed for fruit-picking tasks. However, existing approaches often fail to account for the fruit’s post-harvest condition, leading to premature decay due to excessive grasping forces. This study addresses this gap by designing and evaluating passive soft grasping interfaces for rigid robotic grippers, aiming to handle delicate fruits and vegetables while minimizing bruising. Using hyperelastic materials and 3D printing, four different interface designs, including Gyroid, Grid, Cubic, and Cross 3D patterns, were developed and tested. Experimental evaluations assessed surface adaptability, grasping force distribution, and post-harvest bruising effects. Results indicate that collapsible interface patterns greatly reduce grasping forces and offer lower bruising severity when compared to traditional rigid grippers. These findings suggest that hybrid soft-rigid grasping strategies offer a promising solution for improving fruit-handling efficiency in autonomous harvesting and pick-and-place operations.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Blanco, K., Navas, E., Rodríguez-Nieto, D., Emmi, L., & Fernández, R. (2025). Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting. Agronomy, 15(4), 804. https://doi.org/10.3390/agronomy15040804

MLA 9

Blanco, Kai, et al. “Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting.” Agronomy, vol. 15, no. 4, 2025, p. 804. https://doi.org/10.3390/agronomy15040804.

Chicago

Blanco, Kai, Eduardo Navas, Daniel Rodríguez-Nieto, Luis Emmi, and Roemí Fernández. 2025. “Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting.” Agronomy 15 (4): 804. https://doi.org/10.3390/agronomy15040804.

Harvard

Blanco, K. et al. (2025) ‘Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting’, Agronomy, 15(4), p. 804. doi:10.3390/agronomy15040804.

IEEE

K. Blanco, E. Navas, D. Rodríguez-Nieto, L. Emmi, and R. Fernández, “Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting,” Agronomy, vol. 15, no. 4, p. 804, 2025, doi: 10.3390/agronomy15040804.

BibTeX

@article{blanco2025design,
  title     = {{Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting}},
  author    = {Blanco, Kai and Navas, Eduardo and Rodríguez-Nieto, Daniel and Emmi, Luis and Fernández, Roemí},
  journal   = {Agronomy},
  year      = {2025},
  volume    = {15},
  number    = {4},
  pages     = {804},
  doi       = {10.3390/agronomy15040804},
  url       = {https://doi.org/10.3390/agronomy15040804}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • robotic harvesting
  • fruit harvesting
  • robotic gripper
  • hyperelastic materials
  • pick-and-place

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Blanco, K., Navas, E., Rodríguez-Nieto, D., Emmi, L., & Fernández, R. (2025). Design and Experimental Assessment of 3D-Printed Soft Grasping Interfaces for Robotic Harvesting. Agronomy, 15(4), 804. https://doi.org/10.3390/agronomy15040804

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Agronomy: sign in and open the PDF from this page.

Who wrote this paper?

Kai Blanco, Eduardo Navas, Daniel Rodríguez-Nieto, Luis Emmi, Roemí Fernández.

What is the DOI of this paper?

10.3390/agronomy15040804, permanently at https://doi.org/10.3390/agronomy15040804. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.