Journal article · 2026 · Open access

Design and evaluation of 3D-printed soft pneumatic actuators

Ciro Moreno Garces, Gustavo Adolfo Morales Pavez, Rafael Guerra Silva

Results in Materials, 29, 100906 · Published 31 January 2026 · DOI 10.1016/j.rinma.2026.100906

Open full textCite this paper

In brief

“Design and evaluation of 3D-printed soft pneumatic actuators” is a 2026 journal article by Ciro Moreno Garces and 2 co-authors, published in Results in Materials. OpenAlex counts 6 citations as of 22 November 2026, which puts it in the top 3% of works published in 2026 by citations. It is open access under a CC BY-NC licence: the full text is free to read at Results in Materials.

Citations
6
Most cited in
2026 (6)
Field-weighted impact
6.70
References
28
Authors
3

Abstract

Soft robotics enables safe and adaptive manipulation of delicate objects, with pneumatic actuators offering a flexible alternative to rigid systems. This study explores the design, simulation, fabrication, and testing of a pneumatic soft gripper manufactured via Fused Filament Fabrication using thermoplastic polyurethane. The response of four actuator designs, two chamber-based and two channel-based variants, was evaluated. The influence of geometric variations in chamber height, inter-chamber spacing, and number of chambers was analyzed using finite element analysis. The three-parameter Mooney–Rivlin model was used to predict the material’s response across operating pressures. Actuators with rectangular chambers achieved the highest blocking force, whereas the channel-based modification increased flexion for about 20–33% relative to the base design. One actuator from each model was additively manufactured with thermoplastic polyurethane filament to validate the numerical results, with a relative error in the 8-19% range. Finally, a gripper built using one of the designs successfully handled various objects (e.g., tomatoes, bananas) weighing up to 254g, although it struggled with smooth cylindrical items (e.g., spray cans). These findings demonstrate the feasibility of FFF pneumatic actuators and highlight key design trade-offs for soft robotic applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Garces, C. M., Pavez, G. A. M., & Silva, R. G. (2026). Design and evaluation of 3D-printed soft pneumatic actuators. Results in Materials, 29, 100906. https://doi.org/10.1016/j.rinma.2026.100906

MLA 9

Garces, Ciro Moreno, et al. “Design and evaluation of 3D-printed soft pneumatic actuators.” Results in Materials, vol. 29, 2026, p. 100906. https://doi.org/10.1016/j.rinma.2026.100906.

Chicago

Garces, Ciro Moreno, Gustavo Adolfo Morales Pavez, and Rafael Guerra Silva. 2026. “Design and evaluation of 3D-printed soft pneumatic actuators.” Results in Materials 29: 100906. https://doi.org/10.1016/j.rinma.2026.100906.

Harvard

Garces, C. M., Pavez, G. A. M. and Silva, R. G. (2026) ‘Design and evaluation of 3D-printed soft pneumatic actuators’, Results in Materials, 29, p. 100906. doi:10.1016/j.rinma.2026.100906.

IEEE

C. M. Garces, G. A. M. Pavez, and R. G. Silva, “Design and evaluation of 3D-printed soft pneumatic actuators,” Results in Materials, vol. 29, p. 100906, 2026, doi: 10.1016/j.rinma.2026.100906.

BibTeX

@article{garces2026design,
  title     = {{Design and evaluation of 3D-printed soft pneumatic actuators}},
  author    = {Garces, Ciro Moreno and Pavez, Gustavo Adolfo Morales and Silva, Rafael Guerra},
  journal   = {Results in Materials},
  year      = {2026},
  volume    = {29},
  pages     = {100906},
  doi       = {10.1016/j.rinma.2026.100906},
  url       = {https://doi.org/10.1016/j.rinma.2026.100906}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft pneumatic actuators
  • soft robotics
  • soft gripper
  • fused deposition modeling
  • thermoplastic polyurethane
  • Mooney-Rivlin model
  • actuator geometry
  • blocking force

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Garces, C. M., Pavez, G. A. M., & Silva, R. G. (2026). Design and evaluation of 3D-printed soft pneumatic actuators. Results in Materials, 29, 100906. https://doi.org/10.1016/j.rinma.2026.100906

How many times has this paper been cited?

6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Results in Materials: sign in and open the full text from this page.

Who wrote this paper?

Ciro Moreno Garces, Gustavo Adolfo Morales Pavez, Rafael Guerra Silva.

What is the DOI of this paper?

10.1016/j.rinma.2026.100906, permanently at https://doi.org/10.1016/j.rinma.2026.100906. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.