Journal article · 2026 · Open access

Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects

S. Senthilraja, R. Gangadevi, M. Dharmaraj

Journal of Automation Mobile Robotics & Intelligent Systems, 20(3), 126–131 · Published 21 September 2026 · DOI 10.14313/jamris-2026-044

Open PDFView at the publisherCite this paper

In brief

“Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects” is a 2026 journal article by S. Senthilraja and 2 co-authors, published in Journal of Automation Mobile Robotics & Intelligent Systems. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Automation Mobile Robotics & Intelligent Systems.

Citations
0
References
15
Authors
3

Abstract

This article presents the design, fabrication and testing of a novel vacuum based soft robotic gripper. This work included the fabrication of a cylindrical gripper via a 3D-printed mould, into which a combination of liquid silicone elastomer and curing agent was injected. The deformation behavior of the soft gripper was analyzed for different pressures using ANSYS software. The ANSYS results revealed that the pressure, material and size of the cavity inside the gripper are the important factor that affects the deformation of the soft gripper. Finally the grasping power and holding time of the fabricated gripper has been tested by grasping different objects including fruits, mobile phone, plastic bottles and stainless steel utensils. The validation findings demonstrate the gripping and holding capabilities of the proposed vacuum gripper, suggesting its suitability for various automation and industrial applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Senthilraja, S., Gangadevi, R., & Dharmaraj, M. (2026). Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects. Journal of Automation Mobile Robotics & Intelligent Systems, 20(3), 126–131. https://doi.org/10.14313/jamris-2026-044

MLA 9

Senthilraja, S., et al. “Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects.” Journal of Automation Mobile Robotics & Intelligent Systems, vol. 20, no. 3, 2026, pp. 126–131. https://doi.org/10.14313/jamris-2026-044.

Chicago

Senthilraja, S., R. Gangadevi, and M. Dharmaraj. 2026. “Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects.” Journal of Automation Mobile Robotics & Intelligent Systems 20 (3): 126–131. https://doi.org/10.14313/jamris-2026-044.

Harvard

Senthilraja, S., Gangadevi, R. and Dharmaraj, M. (2026) ‘Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects’, Journal of Automation Mobile Robotics & Intelligent Systems, 20(3), pp. 126–131. doi:10.14313/jamris-2026-044.

IEEE

S. Senthilraja, R. Gangadevi, and M. Dharmaraj, “Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects,” Journal of Automation Mobile Robotics & Intelligent Systems, vol. 20, no. 3, pp. 126–131, 2026, doi: 10.14313/jamris-2026-044.

BibTeX

@article{senthilraja2026design,
  title     = {{Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects}},
  author    = {Senthilraja, S. and Gangadevi, R. and Dharmaraj, M.},
  journal   = {Journal of Automation Mobile Robotics \& Intelligent Systems},
  year      = {2026},
  volume    = {20},
  number    = {3},
  pages     = {126--131},
  doi       = {10.14313/jamris-2026-044},
  url       = {https://doi.org/10.14313/jamris-2026-044}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft gripper
  • vacuum actuation
  • pick-and-place
  • irregular-shaped objects
  • silicone rubber
  • 3D-printed molds
  • deformation analysis
  • grasping force

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Senthilraja, S., Gangadevi, R., & Dharmaraj, M. (2026). Design and Development of Vacuum Actuated Soft Gripper for Pick and Place Different Irregular Shaped Objects. Journal of Automation Mobile Robotics & Intelligent Systems, 20(3), 126–131. https://doi.org/10.14313/jamris-2026-044

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Automation Mobile Robotics & Intelligent Systems: sign in and open the PDF from this page.

Who wrote this paper?

S. Senthilraja, R. Gangadevi, M. Dharmaraj.

What is the DOI of this paper?

10.14313/jamris-2026-044, permanently at https://doi.org/10.14313/jamris-2026-044. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.