Journal article · 2020 · Open access

Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands

Yang Yang, Yunquan Li, Yonghua Chen, Yingtian Li, Tao Ren, Yi Ren

IEEE Access, 8, 155912–155925 · Published 1 January 2020 · DOI 10.1109/access.2020.3019083

Open PDFView at the publisherCite this paper

In brief

“Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands” is a 2020 journal article by Yang Yang and 5 co-authors, published in IEEE Access. OpenAlex counts 32 citations as of 22 November 2026, which puts it in the top 5% of works published in 2020 by citations. It is open access under a CC BY licence: the full text is free to read at IEEE Access.

Citations
32
Most cited in
2025 (7)
Field-weighted impact
1.05
References
39
Authors
6

Abstract

Soft material robots are developing rapidly benefited from their inherent flexibility, adaptability and safety compared to rigid-bodied robots. However, most soft robots are unable to offer high force/strength due to the low rigidity of soft materials that they are composed of. Absence of position feedback is another problem for soft robots. In this research, we aim to address these two challenges in a novel designed soft smart robotic hand. The design of this soft hand is also delicately considered to make it 3D printable, which shortens the design cycle and reduces the fabrication time. This hand consists of five fingers and a palm, all of which can be actuated independently. The finger is designed with two chambers: one air-tight active chamber which can be actuated by compressed air, one passive chamber filled with loosely arranged particles. During bending actuation, particles inside the passive chamber are squeezed by pressurized air, which causes passive jamming. As a result, the stiffness of the finger is strengthened during bending, which endows the hand with larger force output and load-holding capability. Furthermore, position feedback modules made of conductive elastomers are integrated and co-printed with the finger during fabrication. In this research, a hand prototype is manufactured and several experiments regarding to its characteristics and performance are conducted for evaluation. From experimental results, the soft hand achieves maximum holding weight of 1.452kg with particles and 0.8425kg without particles at same actuation pressure of 450kPa.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Yang, Y., Li, Y., Chen, Y., Li, Y., Ren, T., & Ren, Y. (2020). Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands. IEEE Access, 8, 155912–155925. https://doi.org/10.1109/access.2020.3019083

MLA 9

Yang, Yang, et al. “Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands.” IEEE Access, vol. 8, 2020, pp. 155912–155925. https://doi.org/10.1109/access.2020.3019083.

Chicago

Yang, Yang, Yunquan Li, Yonghua Chen, Yingtian Li, Tao Ren, and Yi Ren. 2020. “Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands.” IEEE Access 8: 155912–155925. https://doi.org/10.1109/access.2020.3019083.

Harvard

Yang, Y. et al. (2020) ‘Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands’, IEEE Access, 8, pp. 155912–155925. doi:10.1109/access.2020.3019083.

IEEE

Y. Yang, Y. Li, Y. Chen, Y. Li, T. Ren, and Y. Ren, “Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands,” IEEE Access, vol. 8, pp. 155912–155925, 2020, doi: 10.1109/access.2020.3019083.

BibTeX

@article{yang2020design,
  title     = {{Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands}},
  author    = {Yang, Yang and Li, Yunquan and Chen, Yonghua and Li, Yingtian and Ren, Tao and Ren, Yi},
  journal   = {IEEE Access},
  year      = {2020},
  volume    = {8},
  pages     = {155912--155925},
  doi       = {10.1109/access.2020.3019083},
  url       = {https://doi.org/10.1109/access.2020.3019083}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202144
202266
202366
202433
202577
202666

Its field-weighted citation impact is 1.05: it has been cited 1.05 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft robotic hand
  • bio-inspired robotics
  • pneumatic actuation
  • jamming
  • passive jamming
  • conductive elastomers
  • position feedback
  • 3D printing

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Yang, Y., Li, Y., Chen, Y., Li, Y., Ren, T., & Ren, Y. (2020). Design and Automatic Fabrication of Novel Bio-Inspired Soft Smart Robotic Hands. IEEE Access, 8, 155912–155925. https://doi.org/10.1109/access.2020.3019083

How many times has this paper been cited?

32 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at IEEE Access: sign in and open the PDF from this page.

Who wrote this paper?

Yang Yang, Yunquan Li, Yonghua Chen, Yingtian Li, Tao Ren, Yi Ren.

What is the DOI of this paper?

10.1109/access.2020.3019083, permanently at https://doi.org/10.1109/access.2020.3019083. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.