Conference paper · 2012 · Open access
Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media
Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 4328–4333 · Published 1 May 2012 · DOI 10.1109/icra.2012.6225373
In brief
“Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media” is a 2012 conference paper by Nadia G. Cheng and 6 co-authors, published in Proceedings - IEEE International Conference on Robotics and Automation/Proceedings. OpenAlex counts 382 citations as of 22 November 2026, which puts it in the top 4% of works published in 2012 by citations. It is open access under a CC BY-NC-SA licence: the full text is free to read at DSpace@MIT (Massachusetts Institute of Technology).
- Citations
- 382
- Most cited in
- 2020 (44)
- Field-weighted impact
- 34.80
- References
- 25
- Authors
- 7
Abstract
Hyper-redundant manipulators can be fragile, expensive, and limited in their flexibility due to the distributed and bulky actuators that are typically used to achieve the precision and degrees of freedom (DOFs) required. Here, a manipulator is proposed that is robust, high-force, low-cost, and highly articulated without employing traditional actuators mounted at the manipulator joints. Rather, local tunable stiffness is coupled with off-board spooler motors and tension cables to achieve complex manipulator configurations. Tunable stiffness is achieved by reversible jamming of granular media, which—by applying a vacuum to enclosed grains—causes the grains to transition between solid-like states and liquid-like ones. Experimental studies were conducted to identify grains with high strength-to-weight performance. A prototype of the manipulator is presented with performance analysis, with emphasis on speed, strength, and articulation. This novel design for a manipulator—and use of jamming for robotic applications in general—could greatly benefit applications such as human-safe robotics and systems in which robots need to exhibit high flexibility to conform to their environments.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Cheng, N. G., Lobovsky, M. B., Keating, S. J., Setapen, A., Gero, K. I., Hosoi, A. E., & Iagnemma, K. D. (2012). Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media. Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 4328–4333. https://doi.org/10.1109/icra.2012.6225373
MLA 9
Cheng, Nadia G., et al. “Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media.” Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 2012, pp. 4328–4333. https://doi.org/10.1109/icra.2012.6225373.
Chicago
Cheng, Nadia G., Maxim B. Lobovsky, Steven J. Keating, Adam Setapen, Katy I. Gero, Anette E. Hosoi, and Karl D. Iagnemma. 2012. “Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media.” Proceedings - IEEE International Conference on Robotics and Automation/Proceedings: 4328–4333. https://doi.org/10.1109/icra.2012.6225373.
Harvard
Cheng, N. G. et al. (2012) ‘Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media’, Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, pp. 4328–4333. doi:10.1109/icra.2012.6225373.
IEEE
N. G. Cheng et al., “Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media,” Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, pp. 4328–4333, 2012, doi: 10.1109/icra.2012.6225373.
BibTeX
@inproceedings{cheng2012design,
title = {{Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media}},
author = {Cheng, Nadia G. and Lobovsky, Maxim B. and Keating, Steven J. and Setapen, Adam and Gero, Katy I. and Hosoi, Anette E. and Iagnemma, Karl D.},
booktitle = {Proceedings - IEEE International Conference on Robotics and Automation/Proceedings},
year = {2012},
pages = {4328--4333},
doi = {10.1109/icra.2012.6225373},
url = {https://doi.org/10.1109/icra.2012.6225373}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 34 | |
| 2018 | 35 | |
| 2019 | 40 | |
| 2020 | 44 | |
| 2021 | 26 | |
| 2022 | 28 | |
| 2023 | 19 | |
| 2024 | 32 | |
| 2025 | 23 | |
| 2026 | 9 |
Its field-weighted citation impact is 34.80: it has been cited 34.80 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- jamming
- granular materials
- hyper-redundant manipulators
- tunable stiffness
- tension cables
- flexible robots
- degrees of freedom
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Cheng, N. G., Lobovsky, M. B., Keating, S. J., Setapen, A., Gero, K. I., Hosoi, A. E., & Iagnemma, K. D. (2012). Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media. Proceedings - IEEE International Conference on Robotics and Automation/Proceedings, 4328–4333. https://doi.org/10.1109/icra.2012.6225373
How many times has this paper been cited?
382 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at DSpace@MIT (Massachusetts Institute of Technology): sign in and open the PDF from this page.
Who wrote this paper?
Nadia G. Cheng, Maxim B. Lobovsky, Steven J. Keating, Adam Setapen, Katy I. Gero, Anette E. Hosoi, Karl D. Iagnemma.
What is the DOI of this paper?
10.1109/icra.2012.6225373, permanently at https://doi.org/10.1109/icra.2012.6225373. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.