Conference paper · 2021 · Open access

Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure

Kai Li, Daohui Zhang, Xingang Zhao, Yaqi Chu

IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems, 49–54 · Published 27 July 2021 · DOI 10.1109/cyber53097.2021.9588234

Open full textView at the publisherCite this paper

In brief

“Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure” is a 2021 conference paper by Kai Li and 3 co-authors, published in IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems. OpenAlex counts 2 citations as of 22 November 2026. It is open access under a CC BY-NC-SA licence: the full text is free to read.

Citations
2
Most cited in
2022 (1)
Field-weighted impact
0.71
References
19
Authors
4

Abstract

Due to safe interaction and intrinsic compliance, soft actuators have been developed in robotics around the world, and robots composed of soft actuators have been widely used in many fields such as grasping. However, for the fiber-reinforced actuators (FRAs), the non-circular design of cavity structure causes the problem of stress concentration, which can impact the performance of the soft actuators. In this paper, the eccentric soft bending actuators (ESBAs) with circular cavities were proposed to solve the problem and improve the performance. Particularly, the proposed actuators can be fabricated and assembled modularly with customized design of molds and terminal connectors, which can increase the repeatability and consistency of the actuators. To quantify the performance of the ESBAs, the bending angles and output forces are measured. Experimental results show that the maximum bending angle and output force of the proposed ESBAs could reach 131.6° and 1.5N at 190kPa, respectively. Additionally, comparative experiments on the performance of the ESBAs designed of cavity structure with different parameters were carried out to obtain the optimal ESBAs structure. Furthermore, a three-jaw soft gripper consisted of the ESBAs was developed and its grasping performance was also tested. The results showed that the proposed actuators had potential application in the manipulation of the soft gripper.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Li, K., Zhang, D., Zhao, X., & Chu, Y. (2021). Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure. IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems, 49–54. https://doi.org/10.1109/cyber53097.2021.9588234

MLA 9

Li, Kai, et al. “Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure.” IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems, 2021, pp. 49–54. https://doi.org/10.1109/cyber53097.2021.9588234.

Chicago

Li, Kai, Daohui Zhang, Xingang Zhao, and Yaqi Chu. 2021. “Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure.” IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems: 49–54. https://doi.org/10.1109/cyber53097.2021.9588234.

Harvard

Li, K. et al. (2021) ‘Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure’, IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems, pp. 49–54. doi:10.1109/cyber53097.2021.9588234.

IEEE

K. Li, D. Zhang, X. Zhao, and Y. Chu, “Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure,” IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems, pp. 49–54, 2021, doi: 10.1109/cyber53097.2021.9588234.

BibTeX

@inproceedings{li2021design,
  title     = {{Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure}},
  author    = {Li, Kai and Zhang, Daohui and Zhao, Xingang and Chu, Yaqi},
  booktitle = {IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems},
  year      = {2021},
  pages     = {49--54},
  doi       = {10.1109/cyber53097.2021.9588234},
  url       = {https://doi.org/10.1109/cyber53097.2021.9588234}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft bending actuator
  • eccentric structures
  • fiber-reinforced actuators
  • soft robotics
  • soft gripper
  • stress concentration
  • bending angle
  • output force

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Li, K., Zhang, D., Zhao, X., & Chu, Y. (2021). Design and Analysis of a Novel Soft Bending Actuator Based on Eccentric Structure. IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems, 49–54. https://doi.org/10.1109/cyber53097.2021.9588234

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: sign in and open the full text from this page.

Who wrote this paper?

Kai Li, Daohui Zhang, Xingang Zhao, Yaqi Chu.

What is the DOI of this paper?

10.1109/cyber53097.2021.9588234, permanently at https://doi.org/10.1109/cyber53097.2021.9588234. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.