Dissertation · 2016 · Open access

Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing

Aracama Camino

LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Published 1 January 2016 · DOI 10.48764/z97a-8149

Open full textCite this paper

In brief

“Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing” is a 2016 dissertation by Aracama Camino, published in LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at eBiltegia (Mondragon Unibertsitatea).

Citations
0
Authors
1

Abstract

Shape Memory Alloys (SMA) are metallic alloys with different thermomechanical properties compared to more conventional ones such as iron or aluminum alloys. This kind of alloys have two types of behaviours depending on the temperature. In a high temperature state, they are able to achieve large deformations (until 10 %) and recover them elastically, dissipating a lot of energy due to hysteresis that takes part in this process. This behaviour is known as superelastic effect. On the other hand there is the behaviour at low temperatures, due to a load application, apparently it produces a plastic deformation. But when increasing material temperature, it is able to recover its initial shape, behaving like a mechanical actuator. This behaviour is known as shape memory effect. In recent years, this type of alloys have been investigated and used in applications of different industries such as medical, automotive and aeronautics. The components developed using this type of actuators are able to vary their shape and stiffness, allowing the adaptation of the parts to different boundary conditions. To design such components have been developed a lot of numerical models to simulate the SMAs. It has been observed that few models take into account the nonlinear behaviour of the inner loops of material. Moreover, it has been found that fractional models have great ability to represent nonlinear behaviour using few parameters. In this thesis a fractional model to represent the nonlinear behaviour of the inner loops of the SMA have been developed. It has been also studied new ways to enable quicker simulations containing fractional operators. To do this, we have developed a methodology, where using the Proper Orthogonal Decomposition (POD), it is possible to precalculate some representative results and through interpolation of these results having faster solutions during simulations Finally it has been manufactured a carbon fibre reinforced composite, which has one SMA adhered to it. Through this experiment has analysed the ability of SMAs to reshape rigid structures both unloaded and loaded cases.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Camino, A. (2016). Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). https://doi.org/10.48764/z97a-8149

MLA 9

Camino, Aracama. “Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2016. https://doi.org/10.48764/z97a-8149.

Chicago

Camino, Aracama. 2016. “Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). https://doi.org/10.48764/z97a-8149.

Harvard

Camino, A. (2016) ‘Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing’, LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). doi:10.48764/z97a-8149.

IEEE

A. Camino, “Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing,” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2016, doi: 10.48764/z97a-8149.

BibTeX

@phdthesis{camino2016desarrollo,
  title     = {{Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing}},
  author    = {Camino, Aracama},
  year      = {2016},
  doi       = {10.48764/z97a-8149},
  url       = {https://doi.org/10.48764/z97a-8149}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • shape memory alloys
  • morphing structures
  • material nonlinearity
  • superelasticity
  • shape memory effect
  • proper orthogonal decomposition
  • surrogate models
  • carbon fibre reinforced composites

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Camino, A. (2016). Desarrollo de modelos y herramientas de simulación para FMLS con capacidad de morphing. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). https://doi.org/10.48764/z97a-8149

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at eBiltegia (Mondragon Unibertsitatea): sign in and open the full text from this page.

Who wrote this paper?

Aracama Camino.

What is the DOI of this paper?

10.48764/z97a-8149, permanently at https://doi.org/10.48764/z97a-8149. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.