Journal article · 2018 · Open access
Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V
Micromachines, 9(11), 568 · Published 2 November 2018 · DOI 10.3390/mi9110568
In brief
“Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V” is a 2018 journal article by Zhiqiang Liang and 5 co-authors, published in Micromachines. OpenAlex counts 30 citations as of 20 November 2026. It is open access under a CC BY licence: the full text is free to read at Micromachines.
- Citations
- 30
- Most cited in
- 2024 (7)
- Field-weighted impact
- 1.27
- References
- 18
- Authors
- 6
Abstract
Tool wear is a significant issue for the application of micro end mills. This can be significantly improved by coating materials on tool surfaces. This paper investigates the effects of different coating materials on tool wear in the micro milling of Ti-6Al-4V. A series of cutting experiments were conducted. The tool wear and workpiece surface morphology were investigated by analyzing the wear of the end flank surface and the total cutting edge. It was found that, without coating, serious tool wear and breakage occurred easily during milling. However, AlTiN-based and AlCrN-based coatings could highly reduce cutting edge chipping and flank wear. Specifically, The AlCrN-based coated mill presented less fracture resistance. For TiN coated micro end mill, only slight cutting edge chipping occurred. Compared with other types of tools, the AlTiN-based coated micro end mill could maximize tool life, bringing about an integrated cutting edges with the smallest surface roughness. In short, the AlTiN-based coating material is recommended for the micro end mill in the machining of Ti-6Al-4V.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Liang, Z., Gao, P., Wang, X., Li, S., Zhou, T., & Xiang, J. (2018). Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V. Micromachines, 9(11), 568. https://doi.org/10.3390/mi9110568
MLA 9
Liang, Zhiqiang, et al. “Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V.” Micromachines, vol. 9, no. 11, 2018, p. 568. https://doi.org/10.3390/mi9110568.
Chicago
Liang, Zhiqiang, Peng Gao, Xibin Wang, Shidi Li, Tianfeng Zhou, and Junfeng Xiang. 2018. “Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V.” Micromachines 9 (11): 568. https://doi.org/10.3390/mi9110568.
Harvard
Liang, Z. et al. (2018) ‘Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V’, Micromachines, 9(11), p. 568. doi:10.3390/mi9110568.
IEEE
Z. Liang, P. Gao, X. Wang, S. Li, T. Zhou, and J. Xiang, “Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V,” Micromachines, vol. 9, no. 11, p. 568, 2018, doi: 10.3390/mi9110568.
BibTeX
@article{liang2018cutting,
title = {{Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V}},
author = {Liang, Zhiqiang and Gao, Peng and Wang, Xibin and Li, Shidi and Zhou, Tianfeng and Xiang, Junfeng},
journal = {Micromachines},
year = {2018},
volume = {9},
number = {11},
pages = {568},
doi = {10.3390/mi9110568},
url = {https://doi.org/10.3390/mi9110568}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2019 | 1 | |
| 2020 | 4 | |
| 2021 | 4 | |
| 2022 | 4 | |
| 2023 | 4 | |
| 2024 | 7 | |
| 2025 | 5 | |
| 2026 | 1 |
Its field-weighted citation impact is 1.27: it has been cited 1.27 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Ti-6Al-4V
- tool wear
- TiAlN coating
- AlCrN coating
- TiN coating
- cutting edge chipping
- flank wear
- tool life
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Liang, Z., Gao, P., Wang, X., Li, S., Zhou, T., & Xiang, J. (2018). Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V. Micromachines, 9(11), 568. https://doi.org/10.3390/mi9110568
How many times has this paper been cited?
30 times, according to OpenAlex on 20 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Micromachines: sign in and open the PDF from this page.
Who wrote this paper?
Zhiqiang Liang, Peng Gao, Xibin Wang, Shidi Li, Tianfeng Zhou, Junfeng Xiang.
What is the DOI of this paper?
10.3390/mi9110568, permanently at https://doi.org/10.3390/mi9110568. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 20 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.