Paper · 2012 · Open access

Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V

Yi Hang Fan, Min Li Zheng, Zhe Li, Song Tao Wang, Ying Bin Li

Key engineering materials, 522, 231–235 · Published 1 August 2012 · DOI 10.4028/www.scientific.net/kem.522.231

Open full textCite this paper

In brief

“Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V” is a 2012 paper by Yi Hang Fan and 4 co-authors, published in Key engineering materials. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.

Citations
3
Most cited in
2020 (1)
References
5
Authors
5

Abstract

The machining efficiency of titanium alloy Ti6Al4V is low and the tool wear is serious. In this paper, uncoated carbide tool and two kinds of coated cemented carbide tool were used for dry turning titanium alloy. The experiments used CCD Observing System and the EDAX analysis of SEM to study tool wear mechanism and analyze the cutting performance through tool life, cutting force and cutting temperature. The results show that the main wear reasons are adhesion, diffusion and oxidation wear. For coated tool, the coating peeled off first, and then tool substrate damaged. Compared with coated carbide tool, the uncoated carbide tool with fine grain has longer tool life and lower cutting force and cutting temperature. The changes of cutting force and cutting temperature with cutting speed are not obvious when using the ccomposite coating (TiAlN and AlCrN) carbide tool. The results can help to choose tool material reasonably and control tool wear.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Fan, Y. H., Zheng, M. L., Li, Z., Wang, S. T., & Bin Li, Y. (2012). Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V. Key engineering materials, 522, 231–235. https://doi.org/10.4028/www.scientific.net/kem.522.231

MLA 9

Fan, Yi Hang, et al. “Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V.” Key engineering materials, vol. 522, 2012, pp. 231–235. https://doi.org/10.4028/www.scientific.net/kem.522.231.

Chicago

Fan, Yi Hang, Min Li Zheng, Zhe Li, Song Tao Wang, and Ying Bin Li. 2012. “Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V.” Key engineering materials 522: 231–235. https://doi.org/10.4028/www.scientific.net/kem.522.231.

Harvard

Fan, Y. H. et al. (2012) ‘Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V’, Key engineering materials, 522, pp. 231–235. doi:10.4028/www.scientific.net/kem.522.231.

IEEE

Y. H. Fan, M. L. Zheng, Z. Li, S. T. Wang, and Y. Bin Li, “Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V,” Key engineering materials, vol. 522, pp. 231–235, 2012, doi: 10.4028/www.scientific.net/kem.522.231.

BibTeX

@article{fan2012cutting,
  title     = {{Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V}},
  author    = {Fan, Yi Hang and Zheng, Min Li and Li, Zhe and Wang, Song Tao and Bin Li, Ying},
  journal   = {Key engineering materials},
  year      = {2012},
  volume    = {522},
  pages     = {231--235},
  doi       = {10.4028/www.scientific.net/kem.522.231},
  url       = {https://doi.org/10.4028/www.scientific.net/kem.522.231}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202111
202411

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • Ti-6Al-4V
  • titanium alloy turning
  • cemented carbide tools
  • coated carbide tools
  • tool wear mechanisms
  • dry machining
  • tool life
  • cutting force

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Fan, Y. H., Zheng, M. L., Li, Z., Wang, S. T., & Bin Li, Y. (2012). Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V. Key engineering materials, 522, 231–235. https://doi.org/10.4028/www.scientific.net/kem.522.231

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Key engineering materials: sign in and open the full text from this page.

Who wrote this paper?

Yi Hang Fan, Min Li Zheng, Zhe Li, Song Tao Wang, Ying Bin Li.

What is the DOI of this paper?

10.4028/www.scientific.net/kem.522.231, permanently at https://doi.org/10.4028/www.scientific.net/kem.522.231. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.