Journal article · 2017 · Open access

Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature

Sho Takeda, Hiroyuki Miki, Hiroyuku TAKEISHI, Toshiyuki Takagi

Tribology online, 12(2), 29–36 · Published 1 January 2017 · DOI 10.2474/trol.12.29

Open PDFView at the publisherCite this paper

In brief

“Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature” is a 2017 journal article by Sho Takeda and 3 co-authors, published in Tribology online. OpenAlex counts 10 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Tribology online.

Citations
10
Most cited in
2018 (3)
Field-weighted impact
0.81
References
22
Authors
4

Abstract

Cu/MoS2 composite material was formed by a novel powder-molding technique, which is termed the compression shearing method at room temperature (COSME-RT). Cu/MoS2 sample mechanical and tribological properties and microstructures were investigated. Samples were prepared using five different MoS2 concentrations between 0 to 20 vol.%. No unwanted compounds were generated by the Cu and MoS2 because a high temperature is unnecessary in COSME-RT. Scanning electron microscopy observations confirmed that the MoS2 particles were dispersed homogeneously in the Cu host matrix. The indentation hardness of Cu/MoS2 with 0, 1.0 and 5.0 vol.% MoS2 was higher than 1.6 GPa, and is higher than that formed by conventional powder metallurgy methods and a pure Cu plate. The indentation hardness of the Cu/MoS2 decreased with increasing MoS2 concentration. In contrast, the lubricating performance of MoS2 became more pronounced at 5.0 vol.% or above. The coefficient of friction of Cu/MoS2 with 5.0, 10 and 20 vol.% MoS2 was ~0.20, and is the same as for MoS2 in air. The sample coefficient of friction was maintained because of lubrication by forming a transferred film of wear debris that contained MoS2. Cu/MoS2 had a low coefficient of friction, but maintained its material strength at 5.0 vol.% MoS2.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Takeda, S., Miki, H., TAKEISHI, H., & Takagi, T. (2017). Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature. Tribology online, 12(2), 29–36. https://doi.org/10.2474/trol.12.29

MLA 9

Takeda, Sho, et al. “Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature.” Tribology online, vol. 12, no. 2, 2017, pp. 29–36. https://doi.org/10.2474/trol.12.29.

Chicago

Takeda, Sho, Hiroyuki Miki, Hiroyuku TAKEISHI, and Toshiyuki Takagi. 2017. “Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature.” Tribology online 12 (2): 29–36. https://doi.org/10.2474/trol.12.29.

Harvard

Takeda, S. et al. (2017) ‘Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature’, Tribology online, 12(2), pp. 29–36. doi:10.2474/trol.12.29.

IEEE

S. Takeda, H. Miki, H. TAKEISHI, and T. Takagi, “Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature,” Tribology online, vol. 12, no. 2, pp. 29–36, 2017, doi: 10.2474/trol.12.29.

BibTeX

@article{takeda2017based,
  title     = {{Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature}},
  author    = {Takeda, Sho and Miki, Hiroyuki and TAKEISHI, Hiroyuku and Takagi, Toshiyuki},
  journal   = {Tribology online},
  year      = {2017},
  volume    = {12},
  number    = {2},
  pages     = {29--36},
  doi       = {10.2474/trol.12.29},
  url       = {https://doi.org/10.2474/trol.12.29}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201833
202011
202211
202433
202522

Its field-weighted citation impact is 0.81: it has been cited 0.81 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Powder Metallurgy Techniques and Materials

  • MoS2 dispersion
  • indentation hardness
  • friction coefficient
  • self-lubrication
  • transfer film
  • wear debris
  • copper matrix composites
  • tribological properties

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Takeda, S., Miki, H., TAKEISHI, H., & Takagi, T. (2017). Cu-Based MoS2-Dispersed Composite Material Formed by the Compression Shearing Method at Room Temperature. Tribology online, 12(2), 29–36. https://doi.org/10.2474/trol.12.29

How many times has this paper been cited?

10 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Tribology online: sign in and open the PDF from this page.

Who wrote this paper?

Sho Takeda, Hiroyuki Miki, Hiroyuku TAKEISHI, Toshiyuki Takagi.

What is the DOI of this paper?

10.2474/trol.12.29, permanently at https://doi.org/10.2474/trol.12.29. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.