Journal article · 2024 · Open access

Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability

Fei Gao, Qiyong Zhu, Jingjing Zhang, Xinyu Liu, Zitong Liang, Jiafu Wang, Jianjun Wang, Zhenyu Liu

ISIJ International, 65(1), 142–154 · Published 4 December 2024 · DOI 10.2355/isijinternational.isijint-2024-255

Open full textCite this paper

In brief

“Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability” is a 2024 journal article by Fei Gao and 7 co-authors, published in ISIJ International. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at ISIJ International.

Citations
0
References
39
Authors
8

Abstract

During two stage cold rolling, texture and formability at various reduction distribution coefficients (n) were investigated for ferritic stainless steel for elucidating the evolution of recrystallization texture and leveraging the advantages of this process. The shear band-induced crystallite occurred during cold rolling, and a model of crystallite-assisted γ-fiber texture development was presented during annealing. High cold rolling reduction promoted the crystallite formation and their transformation into more stable {111} components, and the {111} recrystallized nuclei growth, while low cold rolling reduction retarded the phenomenon that the surrounding matrix of deformed grain occurring preferential nucleation was consumed through priority developed γ-fiber recrystallized grain, and promoted the {111} recrystallized nuclei growth during final annealing. Hence, after final annealing, as n decreased (first and second stage cold rolling reductions increased and decreased, respectively), the γ-fiber textures weakened and the fluctuation of intensity along γ-fiber reduced, and the intensity of {110} component displayed a gradual increase followed by reduce. Moreover, as n decreased, the distribution for oriented grain clusters after annealing exhibited gradual uniformity followed by unevenness on account of low degree of microstructure fragmentation and high recovery tendency at lower cold rolling reduction and high nucleation and growth tendency of grains with similar orientations at higher cold rolling reduction. As n decreased, therefore, the ridging resistance and anisotropy of r-value displayed a step-by-step rise followed by a step-by-step reduce, and the difference in r-value was small. The n of 0.405 contributed to realizing optimal matching of r-value and its anisotropy and ridging resistance.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Gao, F., Zhu, Q., Zhang, J., Liu, X., Liang, Z., Wang, J., Wang, J., & Liu, Z. (2024). Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability. ISIJ International, 65(1), 142–154. https://doi.org/10.2355/isijinternational.isijint-2024-255

MLA 9

Gao, Fei, et al. “Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability.” ISIJ International, vol. 65, no. 1, 2024, pp. 142–154. https://doi.org/10.2355/isijinternational.isijint-2024-255.

Chicago

Gao, Fei, Qiyong Zhu, Jingjing Zhang, Xinyu Liu, Zitong Liang, Jiafu Wang, Jianjun Wang, and Zhenyu Liu. 2024. “Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability.” ISIJ International 65 (1): 142–154. https://doi.org/10.2355/isijinternational.isijint-2024-255.

Harvard

Gao, F. et al. (2024) ‘Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability’, ISIJ International, 65(1), pp. 142–154. doi:10.2355/isijinternational.isijint-2024-255.

IEEE

F. Gao et al., “Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability,” ISIJ International, vol. 65, no. 1, pp. 142–154, 2024, doi: 10.2355/isijinternational.isijint-2024-255.

BibTeX

@article{gao2024crystallite,
  title     = {{Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability}},
  author    = {Gao, Fei and Zhu, Qiyong and Zhang, Jingjing and Liu, Xinyu and Liang, Zitong and Wang, Jiafu and Wang, Jianjun and Liu, Zhenyu},
  journal   = {ISIJ International},
  year      = {2024},
  volume    = {65},
  number    = {1},
  pages     = {142--154},
  doi       = {10.2355/isijinternational.isijint-2024-255},
  url       = {https://doi.org/10.2355/isijinternational.isijint-2024-255}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels

  • ferritic stainless steel
  • γ-fiber texture
  • recrystallization texture
  • recrystallization nuclei
  • annealing
  • formability
  • recovery

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Gao, F., Zhu, Q., Zhang, J., Liu, X., Liang, Z., Wang, J., Wang, J., & Liu, Z. (2024). Crystallite-assisted γ-fiber Texture Formation during Two Stage Cold Rolling of Ferritic Stainless Steel and Its Corresponding Relationship with Formability. ISIJ International, 65(1), 142–154. https://doi.org/10.2355/isijinternational.isijint-2024-255

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at ISIJ International: sign in and open the full text from this page.

Who wrote this paper?

Fei Gao, Qiyong Zhu, Jingjing Zhang, Xinyu Liu, Zitong Liang, Jiafu Wang, Jianjun Wang, Zhenyu Liu.

What is the DOI of this paper?

10.2355/isijinternational.isijint-2024-255, permanently at https://doi.org/10.2355/isijinternational.isijint-2024-255. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.