Journal article · 2015 · Open access
CrN coatings deposited by magnetron sputtering: mechanical and tribological properties
DYNA, 82(191), 147–155 · Published 22 June 2015 · DOI 10.15446/dyna.v82n191.43292
In brief
“CrN coatings deposited by magnetron sputtering: mechanical and tribological properties” is a 2015 journal article by Alexander Ruden and 2 co-authors, published in DYNA. OpenAlex counts 28 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at DYNA.
- Citations
- 28
- Most cited in
- 2018 (5)
- Field-weighted impact
- 1.46
- References
- 48
- Authors
- 3
Abstract
Mechanical and tribological properties of CrN coatings grown on steel substrates AISI 304 and AISI 4140 using the magnetron sputtering technique were analyzed. Coatings were grown at two pressures of work, 0.4 and 4.0 Pa. The films grown on AISI 304 at a pressure of work of 0.4 showed the highest hardness because it presented a larger grain size and lower roughness. For CrN synthesized at 0.4 Pa, the surface damage was lower during the tribological test. Adherence studies were also carried out, obtaining Lc1 and Lc2 for coatings produced at both pressures and on both substrates. Better adherence behavior was observed for films grown at a low pressure because these films were thicker (~890 nm).
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Ruden, A., Restrepo-Para, E., & Sequeda, F. O. (2015). CrN coatings deposited by magnetron sputtering: mechanical and tribological properties. DYNA, 82(191), 147–155. https://doi.org/10.15446/dyna.v82n191.43292
MLA 9
Ruden, Alexander, et al. “CrN coatings deposited by magnetron sputtering: mechanical and tribological properties.” DYNA, vol. 82, no. 191, 2015, pp. 147–155. https://doi.org/10.15446/dyna.v82n191.43292.
Chicago
Ruden, Alexander, Elisabeth Restrepo-Para, and Federico O. Sequeda. 2015. “CrN coatings deposited by magnetron sputtering: mechanical and tribological properties.” DYNA 82 (191): 147–155. https://doi.org/10.15446/dyna.v82n191.43292.
Harvard
Ruden, A., Restrepo-Para, E. and Sequeda, F. O. (2015) ‘CrN coatings deposited by magnetron sputtering: mechanical and tribological properties’, DYNA, 82(191), pp. 147–155. doi:10.15446/dyna.v82n191.43292.
IEEE
A. Ruden, E. Restrepo-Para, and F. O. Sequeda, “CrN coatings deposited by magnetron sputtering: mechanical and tribological properties,” DYNA, vol. 82, no. 191, pp. 147–155, 2015, doi: 10.15446/dyna.v82n191.43292.
BibTeX
@article{ruden2015coatings,
title = {{CrN coatings deposited by magnetron sputtering: mechanical and tribological properties}},
author = {Ruden, Alexander and Restrepo-Para, Elisabeth and Sequeda, Federico O.},
journal = {DYNA},
year = {2015},
volume = {82},
number = {191},
pages = {147--155},
doi = {10.15446/dyna.v82n191.43292},
url = {https://doi.org/10.15446/dyna.v82n191.43292}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 2 | |
| 2018 | 5 | |
| 2019 | 1 | |
| 2020 | 5 | |
| 2021 | 1 | |
| 2022 | 1 | |
| 2023 | 4 | |
| 2024 | 2 | |
| 2025 | 2 | |
| 2026 | 5 |
Its field-weighted citation impact is 1.46: it has been cited 1.46 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- chromium nitride coatings
- CrN
- magnetron sputtering
- occupational stress
- 304 stainless steel
- AISI 4140 steel
- coating hardness
- grain size
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Ruden, A., Restrepo-Para, E., & Sequeda, F. O. (2015). CrN coatings deposited by magnetron sputtering: mechanical and tribological properties. DYNA, 82(191), 147–155. https://doi.org/10.15446/dyna.v82n191.43292
How many times has this paper been cited?
28 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at DYNA: sign in and open the PDF from this page.
Who wrote this paper?
Alexander Ruden, Elisabeth Restrepo-Para, Federico O. Sequeda.
What is the DOI of this paper?
10.15446/dyna.v82n191.43292, permanently at https://doi.org/10.15446/dyna.v82n191.43292. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.