Dissertation · 2026 · Open access
Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems
Published 1 January 2026 · DOI 10.25781/kaust-say2l
In brief
“Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems” is a 2026 dissertation by Charbel A. Sayah. OpenAlex counts 0 citations as of 21 November 2026. It is open access: the full text is free to read at King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology).
- Citations
- 0
- Authors
- 1
Abstract
This thesis investigates the relationship between fluid-injection, pore-pressure diffusion, and fault reactivation in a generic layered sedimentary system using a coupled hydromechanical modeling framework. Pore-pressure evolution during fluid injection was simulated using COMSOL Multiphysics, while the resulting fault response and induced seismicity were analyzed using the multi-cycle earthquake simulator MCQsim. The framework was used to evaluate how geological and operational parameters influence the spatial and temporal evolution of pore-pressure perturbations and their potential to promote fault slip. The geological parameters considered include fault permeability and fault strength configuration, while the operational parameters include injection rate, number of active wells, and distance between injection wells and nearby faults. The results show that injection conditions play a major role in controlling both pore-pressure diffusion and seismic response. Injection into a higher-permeability formation at 3 km depth, especially with two active wells operating at higher injection rates close to faults, produced the broadest pressure diffusion and the largest pore-pressure increase along the faults. These conditions generated the highest induced magnitudes, reaching up to Mw 4.87, for our case. In contrast, lower injection rates, lower-permeability formations, and greater well-fault distances reduced the pressure perturbation reaching the faults and limited the magnitude and rupture extent of induced events, with maximum magnitudes decreasing in some cases to Mw 2.12. Near-fault injection commonly produced ruptures that propagated across both fault planes, whereas farther injection resulted in smaller and more localized events. The results also show that fault permeability contrast controls whether faults behave as hydraulic conduits or barriers, thereby influencing pressure transmission. In MCQsim, fault strength configuration strongly affected the number and magnitude of induced earthquakes, with broader unstable-element distributions producing more frequent but generally smaller events. A clear spatial correspondence was observed between elevated pore-pressure, concentrated slip, unstable fault elements, and earthquake hypocenters. This study demonstrates that injection-induced seismicity is controlled by the combined effects of geological structure, reservoir and fault properties, and injection strategy. The findings highlight the importance of integrating geological characterization, physics-based modeling, and monitoring-based risk management to better anticipate and mitigate seismic hazard during fluid injection operations in structurally complex sedimentary basins.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sayah, C. A. (2026). Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems. https://doi.org/10.25781/kaust-say2l
MLA 9
Sayah, Charbel A. “Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems.” 2026. https://doi.org/10.25781/kaust-say2l.
Chicago
Sayah, Charbel A. 2026. “Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems.” https://doi.org/10.25781/kaust-say2l.
Harvard
Sayah, C. A. (2026) ‘Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems’. doi:10.25781/kaust-say2l.
IEEE
C. A. Sayah, “Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems,” 2026, doi: 10.25781/kaust-say2l.
BibTeX
@phdthesis{sayah2026coupled,
title = {{Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems}},
author = {Sayah, Charbel A.},
year = {2026},
doi = {10.25781/kaust-say2l},
url = {https://doi.org/10.25781/kaust-say2l}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Energy › Fuel Technology › Hydraulic Fracturing and Reservoir Analysis
- injection-induced seismicity
- pore pressure diffusion
- fault reactivation
- hydro-mechanical coupling
- sedimentary basins
- fault zone permeability
- fault strength
- injection rate
Work with this paper
Most-cited papers in Energy
- Electrochemical Photolysis of Water at a Semiconductor ElectrodeAkira Fujishima, Kenichi Honda · Nature · 1972 · 34,586 citations
- A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 filmsBrian C. O’Regan, Michaël Grätzel · Nature · 1991 · 28,861 citations
- Environmental Applications of Semiconductor PhotocatalysisMichael Robert Hoffmann, Scot T. Martin, Wonyong Choi and 1 more · Chemical Reviews · 1995 · 18,693 citations
- Electrical Energy Storage for the Grid: A Battery of ChoicesBruce Dunn, Haresh Kamath, Jean‐Marie Tarascon · Science · 2011 · 15,286 citations
- Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell CathodeJens K. Nørskov, Jan Rossmeisl, Áshildur Logadóttir and 4 more · The Journal of Physical Chemistry B · 2004 · 13,331 citations
Questions about this paper
How do I cite this paper in APA style?
Sayah, C. A. (2026). Coupled Fluid-Flow and Earthquake Source Modeling of Injection-Induced Seismicity in Sedimentary Systems. https://doi.org/10.25781/kaust-say2l
How many times has this paper been cited?
0 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology): sign in and open the full text from this page.
Who wrote this paper?
Charbel A. Sayah.
What is the DOI of this paper?
10.25781/kaust-say2l, permanently at https://doi.org/10.25781/kaust-say2l. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.