Journal article · 2023 · Open access
Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates
International Journal of Engineering, 37(1), 127–135 · Published 20 November 2023 · DOI 10.5829/ije.2024.37.01a.12
In brief
“Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates” is a 2023 journal article by Nessa Fereshteh-Saniee and 3 co-authors, published in International Journal of Engineering. OpenAlex counts 1 citations as of 17 November 2026, which puts it in the top 9% of works published in 2023 by citations. It is open access under a CC BY licence: the full text is free to read at International Journal of Engineering.
- Citations
- 1
- Most cited in
- 2026 (1)
- Field-weighted impact
- 0.10
- References
- 39
- Authors
- 4
Abstract
In recent years, implants are used as prostheses to replace and protect bone. Titanium, as an implantable material, needs to improve corrosion and wear properties for better performance. Therefore, in the current study nitride coatings were applied with the aim of improving corrosion and wear properties. Cathodic arc evaporation physical vapor deposition (CAE-PVD) technique was used to deposit nanolayered CrN/CrAlN coatings on commercially pure titanium and Ti6Al4V substrates for biomaterial applications. X-ray diffraction (XRD) was used to characterize the crystal structure of the coating, and scanning electron microscopy (SEM) and field emission scanning electron microscopy (FESEM) were utilized to observe the surface morphology and cross-section of the coating. The coating adhesion was measured according to VDI 3198 standard using a Rockwell-C indenter. The corrosion behavior was evaluated by potentiodynamic polarization and spectroscope electrochemical impedance in Ringer's solution. The results showed that the nanolayered coating changed the corrosion potential from -0.368 V to -0.054 V for the titanium sample and from -0.405 V to -0.028 V for the Ti6Al4V specimen. Additionally, the corrosion current density was reduced to about one-eighth and a third for the titanium and Ti6Al4V coated samples, respectively. The capacitator circle diameters increased due to the deposition of CrN/CrAlN coating, demonstrating enhanced corrosion behavior of the coated samples compared to uncoated specimens, as the coating acted as a barrier against corrosive liquids accessing the substrate.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Fereshteh-Saniee, N., Elmkhah, H., Molaei, M. J., & Zolriasatein, A. (2023). Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates. International Journal of Engineering, 37(1), 127–135. https://doi.org/10.5829/ije.2024.37.01a.12
MLA 9
Fereshteh-Saniee, Nessa, et al. “Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates.” International Journal of Engineering, vol. 37, no. 1, 2023, pp. 127–135. https://doi.org/10.5829/ije.2024.37.01a.12.
Chicago
Fereshteh-Saniee, Nessa, Hassan Elmkhah, Mohammad Jafar Molaei, and Ashkan Zolriasatein. 2023. “Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates.” International Journal of Engineering 37 (1): 127–135. https://doi.org/10.5829/ije.2024.37.01a.12.
Harvard
Fereshteh-Saniee, N. et al. (2023) ‘Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates’, International Journal of Engineering, 37(1), pp. 127–135. doi:10.5829/ije.2024.37.01a.12.
IEEE
N. Fereshteh-Saniee, H. Elmkhah, M. J. Molaei, and A. Zolriasatein, “Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates,” International Journal of Engineering, vol. 37, no. 1, pp. 127–135, 2023, doi: 10.5829/ije.2024.37.01a.12.
BibTeX
@article{fereshtehsaniee2023corrosion,
title = {{Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates}},
author = {Fereshteh-Saniee, Nessa and Elmkhah, Hassan and Molaei, Mohammad Jafar and Zolriasatein, Ashkan},
journal = {International Journal of Engineering},
year = {2023},
volume = {37},
number = {1},
pages = {127--135},
doi = {10.5829/ije.2024.37.01a.12},
url = {https://doi.org/10.5829/ije.2024.37.01a.12}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- nanolayered coatings
- titanium implants
- Ti-6Al-4V
- corrosion resistance
- cathodic arc deposition
- nitride coatings
- coating adhesion
- Ringer's solution
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Fereshteh-Saniee, N., Elmkhah, H., Molaei, M. J., & Zolriasatein, A. (2023). Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates. International Journal of Engineering, 37(1), 127–135. https://doi.org/10.5829/ije.2024.37.01a.12
How many times has this paper been cited?
1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Journal of Engineering: sign in and open the PDF from this page.
Who wrote this paper?
Nessa Fereshteh-Saniee, Hassan Elmkhah, Mohammad Jafar Molaei, Ashkan Zolriasatein.
What is the DOI of this paper?
10.5829/ije.2024.37.01a.12, permanently at https://doi.org/10.5829/ije.2024.37.01a.12. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.