Dissertation · 2013 · Open access
Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional
Universidade Federal de Uberlândia · Published 29 August 2013 · DOI 10.14393/ufu.di.2018.1241
In brief
“Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional” is a 2013 dissertation by Diandro Bailoni Fernandes, published in Universidade Federal de Uberlândia. OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read.
- Citations
- 0
- References
- 24
- Authors
- 1
Abstract
The growing need for application of MIG/MAG welding positional has motivated studies that crave a better understanding of the parameters that directly demonstrate the good performance under certain conditions. An index relevant in comparing the performance between multiple processes is the determination of the heat input. Such measurement is routinely carried out welding with the use of calorimetry, which technique using liquid nitrogen has been one of the best reliability. Other fronts study addresses the analysis of electrical signals monitored during the course of the weld, which also enable the verification of the performance of the process in a more direct and simplified way. While this is fact, so far few studies have led to the application of such techniques in other welding positions, beyond ordinary flat position. Therefore, the present work has as main objective to establish a correlation between the metal transfer short-circuit mode stability, measured by Laprosolda Criterion for Regularity, with the deposition efficiency, heat input and thermal contribution of the MIG / MAG (operating in constant voltage) the most common welding positions. Weldments were performed at 60 ° chamfer preparation with V groove in carbon mild steel using electrode of 1.2 mm diameter ER70S-6, two shielding gases (Ar +25% CO2 and pure CO2) three current ranges (arising from wire feed speed) and three different welding positions (flat, vertical downhill and overhead), enabled through a device for fixing the test plate adapted to a robotic unit. Enjoying the parameters measured and the results obtained for setting practical operating envelope, observed that the position, shielding gas, welding current and inductive effect influenced specifically measured responses (IVCC, short-circuit rate, deposition efficiency, heat input and thermal efficiency). In addition, from obtained results, burn-off rate models were developed (simplified and expanded model), derived from the original equation of consumption in order to have practical results and used for industrial purposes, being the expanded model the one with better experimental fitness and statistical significance.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Fernandes, D. B. (2013). Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.1241
MLA 9
Fernandes, Diandro Bailoni. “Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional.” Universidade Federal de Uberlândia, 2013. https://doi.org/10.14393/ufu.di.2018.1241.
Chicago
Fernandes, Diandro Bailoni. 2013. “Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional.” Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.1241.
Harvard
Fernandes, D. B. (2013) ‘Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional’, Universidade Federal de Uberlândia. doi:10.14393/ufu.di.2018.1241.
IEEE
D. B. Fernandes, “Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional,” Universidade Federal de Uberlândia, 2013, doi: 10.14393/ufu.di.2018.1241.
BibTeX
@phdthesis{fernandes2013correla,
title = {{Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional}},
author = {Fernandes, Diandro Bailoni},
year = {2013},
doi = {10.14393/ufu.di.2018.1241},
url = {https://doi.org/10.14393/ufu.di.2018.1241}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- MIG/MAG welding
- deposition efficiency
- heat input
- thermal efficiency
- shielding gas
- welding current
- overhead welding
- inductive effects
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Fernandes, D. B. (2013). Correlação entre a regularidade da transferência metálica no modo curto-circuito com o desempenho do processo para a soldagem MIG/MAG posicional. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.1241
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: sign in and open the PDF from this page.
Who wrote this paper?
Diandro Bailoni Fernandes.
What is the DOI of this paper?
10.14393/ufu.di.2018.1241, permanently at https://doi.org/10.14393/ufu.di.2018.1241. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.