Dissertation · 2014 · Open access

Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites

Thierry Rey

theses.fr (ABES) · Published 16 September 2014 · DOI 10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c

Open PDFView at the publisherCite this paper

In brief

“Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites” is a 2014 dissertation by Thierry Rey, published in theses.fr (ABES). OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at HAL.

Citations
1
Most cited in
2020 (1)
References
114
Authors
1

Abstract

Contribution à l'élaboration, l'expérimentation et la modélisation de composites architecturés AMF NiTi/élastomère silicone Les alliages à mémoire de forme Nickel-Titane sont connus pour leurs propriétés de superélasticité associées à une transformation martensitique élastique, de ferroélasticité liées à la réorientation de variantes de martensite et enfin de mémoire de forme. Les propriétés des matériaux architecturés NiTi, tels que des tricots, des matériaux cellulaires,… dépendent de celles de l'alliage NiTi constituant et de la structure géométrique. L'étude porte sur des matériaux architecturés composites constitués par des matériaux architecturés NiTi saturés par des élastomères silicones. De tels matériaux possèdent potentiellement une gamme étendue de propriétés dépendant à la fois des matériaux constitutifs, mais également des interfaces et de la topologie.La première partie du travail porte sur l'étude de l'interface NiTi silicone. Parmi les solutions testées, le traitement de surface par plasma a été particulièrement étudié. L'influence des paramètres du traitement plasma sur la qualité des interfaces a tout d'abord été étudiée grâce à des essais de pull-out réalisés sur des fils de NiTi enrobés dans des silicones. Les paramètres optimaux de traitement par plasma ont ensuite été appliqués pour élaborer des matériaux architecturés tubulaires constitués d'un tricot NiTi enrobé d'élastomère. Le comportement mécanique du composite ainsi obtenu a été caractérisé par des essais de traction et de gonflement.La deuxième partie de l'étude porte sur le comportement de l'élastomère silicone. Une campagne expérimentale a été menée afin de déterminer l'influence de la température sur le comportement mécanique du silicone, en particulier sur l'accommodation du matériau après la première charge (effet Mullins), l'hystérésis mécanique et la relaxation. Une loi de comportement prenant en compte l'hystérésis mécanique a ensuite été proposée. Inspirée par de nombreux travaux en mécanique des élastomères, l'approche utilise une décomposition de l'espace en un nombre fini de directions. Une loi monodimensionnel incluant les effets d'hystérésis est écrite pour chacune des directions. Ce modèle a été implémenté dans un code de calculs par éléments finis (Abaqus) et a été testé avec des calculs de structures.Dans la troisième partie de l'étude, le formalisme précédent a été utilisé afin de proposer un modèle pour le comportement mécanique du NiTi, en se restreignant dans cette première contribution à la superélasticité. La confrontation des résultats de simulation avec ceux de tests expérimentaux de la littérature sur des plaques isotropes et anisotropes montre les perspectives prometteuses d'une telle approche.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Rey, T. (2014). Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites. theses.fr (ABES). https://doi.org/10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c

MLA 9

Rey, Thierry. “Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites.” theses.fr (ABES), 2014. https://doi.org/10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c.

Chicago

Rey, Thierry. 2014. “Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites.” theses.fr (ABES). https://doi.org/10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c.

Harvard

Rey, T. (2014) ‘Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites’, theses.fr (ABES). doi:10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c.

IEEE

T. Rey, “Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites,” theses.fr (ABES), 2014, doi: 10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c.

BibTeX

@phdthesis{rey2014contribution,
  title     = {{Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites}},
  author    = {Rey, Thierry},
  year      = {2014},
  doi       = {10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c},
  url       = {https://doi.org/10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • shape memory alloys
  • NiTi
  • silicone rubber
  • plasma surface treatment
  • pull-out test
  • tubular composites
  • Mullins effect
  • mechanical hysteresis

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Rey, T. (2014). Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel-Titanium/silicone rubber composites. theses.fr (ABES). https://doi.org/10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at HAL: sign in and open the PDF from this page.

Who wrote this paper?

Thierry Rey.

What is the DOI of this paper?

10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c, permanently at https://doi.org/10.70675/1d41a976z8ed5z4b38z8174z6f6ce132437c. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.