Dissertation · 2014 · Open access
Computer modelling of silicon single junction and tandem solar cells
IACS Institutional Repository (Indian Association for the Cultivation of Science) · Published 1 January 2014
In brief
“Computer modelling of silicon single junction and tandem solar cells” is a 2014 dissertation by Saptarshi Chakraborty, published in IACS Institutional Repository (Indian Association for the Cultivation of Science). OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at IACS Institutional Repository (Indian Association for the Cultivation of Science).
- Citations
- 0
- Authors
- 1
Abstract
In this thesis it has been used the detailed electrical-optical model Amorphous Semiconductor Device Modelling Programme (ASDMP), ab-initio in its electrical part, to understand and optimise the performance of various types of single and multi-junction solar cells\nthat have the potential of producing high stabilised conversion efficiency at a reduced cost relative to standard wafer based crystalline silicon (c-Si) cells. In Part-I, dealing with PIN cells, we first explained why the open circuit voltage (Voc) of hydrogenated microcrystalline silicon (μc-Si:H) cells in general declines with increasing crystalline volume fraction, while the limiting\ncases of large-grained fluorinated microcrystalline silicon PIN cells and the standard mono-c-Si P/N cells show increased Voc. We have also studied hydrogenated amorphous silicon (a-Si:H)\nand μc-Si:H cell behaviour under variable light intensity. We next compared the performance of standard diffused P/N junction c-Si solar cells to “Heterojunction with Intrinsic Thin Layer”\n(HIT) cells at different ambient temperatures and showed that while HIT cells are well-adapted for use in hot regions, the former is better-suited for low temperature applications. As the\nperformance of HIT cells is adversely affected by the defects on the wafer surface, we have modelled the photo-luminescence intensity from HIT cells to quantify these defects. Finally we\nhave shown that a minimum of 5 μm thickness of a c-Si film, epitaxially grown by PECVD on a c-Si wafer at ~165˚C, is necessary to make cells based on this material feasible for high efficiency applications.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Chakraborty, S. (2014). Computer modelling of silicon single junction and tandem solar cells. IACS Institutional Repository (Indian Association for the Cultivation of Science). http://hdl.handle.net/10821/8249
MLA 9
Chakraborty, Saptarshi. “Computer modelling of silicon single junction and tandem solar cells.” IACS Institutional Repository (Indian Association for the Cultivation of Science), 2014. http://hdl.handle.net/10821/8249.
Chicago
Chakraborty, Saptarshi. 2014. “Computer modelling of silicon single junction and tandem solar cells.” IACS Institutional Repository (Indian Association for the Cultivation of Science). http://hdl.handle.net/10821/8249.
Harvard
Chakraborty, S. (2014) ‘Computer modelling of silicon single junction and tandem solar cells’, IACS Institutional Repository (Indian Association for the Cultivation of Science). Available at: http://hdl.handle.net/10821/8249.
IEEE
S. Chakraborty, “Computer modelling of silicon single junction and tandem solar cells,” IACS Institutional Repository (Indian Association for the Cultivation of Science), 2014.
BibTeX
@phdthesis{chakraborty2014computer,
title = {{Computer modelling of silicon single junction and tandem solar cells}},
author = {Chakraborty, Saptarshi},
year = {2014},
url = {http://hdl.handle.net/10821/8249}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- silicon solar cells
- tandem solar cells
- multijunction solar cells
- p-i-n junction
- microcrystalline silicon
- hydrogenated amorphous silicon
- open-circuit voltage
- crystalline fraction
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Chakraborty, S. (2014). Computer modelling of silicon single junction and tandem solar cells. IACS Institutional Repository (Indian Association for the Cultivation of Science). http://hdl.handle.net/10821/8249
How many times has this paper been cited?
0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at IACS Institutional Repository (Indian Association for the Cultivation of Science).
Who wrote this paper?
Saptarshi Chakraborty.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.