Journal article · 2025 · Open access

Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting

Soni Prayogi, A. Muhammad

Materials for Renewable and Sustainable Energy, 15(1) · Published 28 November 2025 · DOI 10.1007/s40243-025-00342-6

Read the free full textCite this paper

In brief

“Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting” is a 2025 journal article by Soni Prayogi and A. Muhammad, published in Materials for Renewable and Sustainable Energy. OpenAlex counts 2 citations as of 16 November 2026, which puts it in the top 5% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Materials for Renewable and Sustainable Energy.

Citations
2
Most cited in
2026 (2)
Field-weighted impact
0.39
References
25
Authors
2

Abstract

Enhancing the energy conversion efficiency of hydrogenated amorphous silicon (a-Si: H) solar cells remains a key objective in advancing thin-film photovoltaic technology. This study presents a comprehensive numerical optimization of a-Si: H p-i-n solar cells using the OghmaNano simulation platform under standard AM1.5G illumination (100 mW/cm 2 ). The modeling accounts for Shockley–Read–Hall (SRH) recombination, carrier mobility, and field-dependent generation to ensure physical accuracy. The investigation focused on simultaneous optimization of the intrinsic layer thickness (100–600 nm) and bandgap tuning (1.6–1.95 eV) to determine their combined influence on device performance. Results revealed that the trade-off between open-circuit voltage (Voc) and short-circuit current (Jsc) is governed by the balance between enhanced light absorption and increased carrier recombination. An intrinsic layer thickness of 200 nm and bandgap of 1.95 eV yielded the optimal configuration, achieving a simulated efficiency of 11.27%. This value aligns with experimental benchmarks when idealized conditions are considered. The findings confirm that dual-parameter optimization combining geometrical and electronic tuning can substantially improve carrier collection and energy conversion efficiency. Compared with previous studies, the proposed design demonstrates superior performance and provides clear guidelines for the structural engineering of high-efficiency a-Si: H solar cells.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Prayogi, S., & Muhammad, A. (2025). Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting. Materials for Renewable and Sustainable Energy, 15(1). https://doi.org/10.1007/s40243-025-00342-6

MLA 9

Prayogi, Soni, and A. Muhammad. “Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting.” Materials for Renewable and Sustainable Energy, vol. 15, no. 1, 2025. https://doi.org/10.1007/s40243-025-00342-6.

Chicago

Prayogi, Soni and A. Muhammad. 2025. “Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting.” Materials for Renewable and Sustainable Energy 15 (1). https://doi.org/10.1007/s40243-025-00342-6.

Harvard

Prayogi, S. and Muhammad, A. (2025) ‘Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting’, Materials for Renewable and Sustainable Energy, 15(1). doi:10.1007/s40243-025-00342-6.

IEEE

S. Prayogi and A. Muhammad, “Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting,” Materials for Renewable and Sustainable Energy, vol. 15, no. 1, 2025, doi: 10.1007/s40243-025-00342-6.

BibTeX

@article{prayogi2025comprehensive,
  title     = {{Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting}},
  author    = {Prayogi, Soni and Muhammad, A.},
  journal   = {Materials for Renewable and Sustainable Energy},
  year      = {2025},
  volume    = {15},
  number    = {1},
  doi       = {10.1007/s40243-025-00342-6},
  url       = {https://doi.org/10.1007/s40243-025-00342-6}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • hydrogenated amorphous silicon
  • p-i-n solar cells
  • thin-film solar cells
  • intrinsic layer thickness
  • band gap tuning
  • Shockley-Read-Hall recombination
  • open-circuit voltage
  • short-circuit current

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Prayogi, S., & Muhammad, A. (2025). Comprehensive optimization of a-Si: H p-i-n structures for enhanced energy harvesting. Materials for Renewable and Sustainable Energy, 15(1). https://doi.org/10.1007/s40243-025-00342-6

How many times has this paper been cited?

2 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Materials for Renewable and Sustainable Energy.

Who wrote this paper?

Soni Prayogi, A. Muhammad.

What is the DOI of this paper?

10.1007/s40243-025-00342-6. The permanent link is https://doi.org/10.1007/s40243-025-00342-6.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.