Journal article · 2023 · Open access

Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

Jinfu Zhao, Zhanqiang Liu, Zipeng Gong, Annan Liu, Yukui Cai, Bing Wang, Qinghua Song, Xiaoliang Liang, Yanbin Zhang, Zhicheng Zhang, Haiyang Ji

Micromachines, 14(6), 1263 · Published 17 June 2023 · DOI 10.3390/mi14061263

Open PDFView at the publisherCite this paper

In brief

“Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions” is a 2023 journal article by Jinfu Zhao and 10 co-authors, published in Micromachines. OpenAlex counts 20 citations as of 17 November 2026, which puts it in the top 7% of works published in 2023 by citations. It is open access under a CC BY licence: the full text is free to read at Micromachines.

Citations
20
Most cited in
2026 (9)
Field-weighted impact
1.90
References
24
Authors
11

Abstract

TiAlN-coated carbide tools have been used to machine Ti-6Al-4V alloys in aviation workshops. However, the effect of TiAlN coating on surface morphology and tool wear in the processing of Ti-6Al-4V alloys under various cooling conditions has not been reported in the public published literature. In our current research, turning experiments of Ti-6Al-4V with uncoated and TiAlN tools under dry, MQL, flood cooling, and cryogenic spray jet cooling conditions were carried out. The machined surface roughness and tool life were selected as the two main quantitative indexes for estimating the effects of TiAlN coating on the cutting performance of Ti-6Al-4V under various cooling conditions. The results showed that TiAlN coating makes it hard to improve the machined surface roughness and tool wear of a cutting titanium alloy at a low speed of 75 m/min compared to that achieved by uncoated tools. The TiAlN tools presented excellent tool life in turning Ti-6Al-4V at a high speed of 150 m/min compared to that achieved by uncoated tools. From the perspective of obtaining finished surface roughness and superior tool life in high-speed turning Ti-6Al-4V, the selection of TiAlN tools is feasible and reasonable under the cryogenic spray jet cooling condition. The dedicative results and conclusions of this research could guide the optimized selection of cutting tools in machining Ti-6Al-4V for the aviation industry.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Zhao, J., Liu, Z., Gong, Z., Liu, A., Cai, Y., Wang, B., Song, Q., Liang, X., Zhang, Y., Zhang, Z., & Ji, H. (2023). Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions. Micromachines, 14(6), 1263. https://doi.org/10.3390/mi14061263

MLA 9

Zhao, Jinfu, et al. “Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions.” Micromachines, vol. 14, no. 6, 2023, p. 1263. https://doi.org/10.3390/mi14061263.

Chicago

Zhao, Jinfu, Zhanqiang Liu, Zipeng Gong, Annan Liu, Yukui Cai, Bing Wang, Qinghua Song, et al. 2023. “Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions.” Micromachines 14 (6): 1263. https://doi.org/10.3390/mi14061263.

Harvard

Zhao, J. et al. (2023) ‘Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions’, Micromachines, 14(6), p. 1263. doi:10.3390/mi14061263.

IEEE

J. Zhao et al., “Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions,” Micromachines, vol. 14, no. 6, p. 1263, 2023, doi: 10.3390/mi14061263.

BibTeX

@article{zhao2023comparison,
  title     = {{Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions}},
  author    = {Zhao, Jinfu and Liu, Zhanqiang and Gong, Zipeng and Liu, Annan and Cai, Yukui and Wang, Bing and Song, Qinghua and Liang, Xiaoliang and Zhang, Yanbin and Zhang, Zhicheng and Ji, Haiyang},
  journal   = {Micromachines},
  year      = {2023},
  volume    = {14},
  number    = {6},
  pages     = {1263},
  doi       = {10.3390/mi14061263},
  url       = {https://doi.org/10.3390/mi14061263}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202322
202433
202566
202699

Its field-weighted citation impact is 1.90: it has been cited 1.90 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • Ti-6Al-4V
  • titanium alloy machining
  • uncoated cutting tools
  • surface roughness
  • tool wear
  • tool life
  • dry machining
  • minimum quantity lubrication

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Zhao, J., Liu, Z., Gong, Z., Liu, A., Cai, Y., Wang, B., Song, Q., Liang, X., Zhang, Y., Zhang, Z., & Ji, H. (2023). Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions. Micromachines, 14(6), 1263. https://doi.org/10.3390/mi14061263

How many times has this paper been cited?

20 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Micromachines: sign in and open the PDF from this page.

Who wrote this paper?

Jinfu Zhao, Zhanqiang Liu, Zipeng Gong, Annan Liu, Yukui Cai, Bing Wang, Qinghua Song, Xiaoliang Liang, Yanbin Zhang, Zhicheng Zhang, Haiyang Ji.

What is the DOI of this paper?

10.3390/mi14061263, permanently at https://doi.org/10.3390/mi14061263. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.